454199
9
Zoom out
Zoom in
Previous page
1/92
Next page
9
1
2
1
2
3, 4
5
56
3
3
4
4
CHANGING THE PAPER DUST BAG
Change the bag whenever the “Bag Full” (15) indica-
tor comes on. To replace the Paper Dust Bag:
1.
Disconnect the power cord from the electrical outlet. Pull
the Dust lid button (16) and remove the Dust lid outwards
to remove it from the cleaner.
2.
Push downwards at the edge to the left of the plastic
holder, so that the bag loosens from the vacuum inlet of
the machine.
3.
Grasp at the cardboard piece of the bag and gently pull
the full bag outwards - away from cleaner.
4.
Insert a new paper dust bag into the slot of the bag holder
and push the bag in place. Check so that the paper dust
bag not is jammed in the holder.Only the cardboard piece
of the bag should be attached to the bag holder.
5.
Push the bag holder with the new bag upwards, so that
the bag inlet fastens to the inlet of the machine. Make
sure that the bag is unfold and will fi t in place in the bag
housing. Also check that the ”no bag” clip is placed to the
left so that the lid will be able to close.
6.
Fit the two notches of the back cover to the two slots at
the lower part of the bag housing, and push the back
cover back in place at the housing.
EMPTYING THE CLOTH DUST BAG
Empty the Bag whenever the “Bag Full” Light (15)
comes on. To empty or to replace:
1.
Disconnect the power cord from the electrical outlet. Pull
the Dust lid button (16) and drag the Dust lid outwards to
remove it from the cleaner.
2.
Push downwards at the edge to the left of the plastic
holder, so that the bag inlet loosens from the vacuum inlet
of the machine.
3.
Grasp at the plastic fl ange of the bag and gently pull the
bag outwards - away from cleaner.
4.
Remove bag clip and shake out bag contents.
5.
Put the bag clip back on the bag.
6.
Insert the cleaned/new cloth bag into the slot of the bag
holder and push the bag in place so that bag is secured.
7.
Push the bag holder with the new bag upwards, so that
the bag inlet fasten to the inlet of the machine. Make
sure that the bag is unfold and will fi t in place at the bag
housing. Also check that the ”no bag” clip is placed to the
left so that the lid will be able to close.
8.
Fit the two notches of the back cover to the two slots at
the lower part of the bag housing, and push the back
cover back in place at the housing.
MAINTENANCE
NOTE!
Photos belows shows changing of the paper dust bags!
Never operate the machine without a Dust Bag in place.
Always disconnect the power cord before
performing any machine maintenance.
823 0102 000 Instruction for use GU 305, GU 355, GU 355 DUAL, GU 455 DUAL EU 1.indd 9823 0102 000 Instruction for use GU 305, GU 355, GU 355 DUAL, GU 455 DUAL EU 1.indd 9 2008-04-17 09:36:332008-04-17 09:36:33
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk GU 12 SMU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk GU 12 SMU in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info