Manual Nilfisk gs 90 s (page 17 of 48) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

316939

Zoom out

Zoom in

1/48

8 Suction with dust bag

The cleaner is supplied with a two-ply self-locating dust bags.

To release the container, unfasten the two latches and lift off

the upper part with the motor/filter section. Fix the dust bag as

follows:

1 Pierce the dust bag’s perforation and place it in the lower

container.

2 Pull the dust bag plastic plate over the suction inlet with

both hands. Unfold the dust bag carefully. Replace the top

container and lock the two latches.

Note

The suction efficiency depends on the size and quality of the

dust bag. Use original Nilfisk bags only. If non-Nilfisk dust bags

are used, and airflow restricted, overheating of the motor and

subsequent damage may result.

9 Exhaust filter

Exhaust filters is used when absolutely clean exhaust air is

necessary. The exhaust filter is mounted on to the motor in

place of the diffuser. The exhaust filter is easily fitted and the

fllter element is replaceable. A special handle is delivered

together with the exhaust filter.

10 Blowing attachment

Mounting

Remove the diffuser and sound absorber (see page 2)

Place the blowing adaptor 11562000 on the motor. Each one

is kept in place by handle of the motor.

Fit the blowing attachment into the motor blowing adaptors.

Before connecting a hose make sure that it is clean - place its

open end in the container inlet for a moment with the motors

running and shake it.

Maintenance

Always keep the cleaner in a dry place. The bearings in the

motor are pregreased and designed for continuous heavy

work.

Depending on the number of running hours the dust filter

should be replaced.

For details of service or maintenance please contact NILFISK

directly.

Rating Plate

The model and serial number of your machine are shown on

the ratingplate on the machine. This information is needed

when ordering repair for the machine. Use the space below to

note the model and serial number og your machine for future

reference.

Model

Serial number

Year of manufacture

Powering voltage

Trouble-shooting

• the motor will not start

- a fuse may have blown and needs replacing.

- the cable or the wall socket may be defective and needs

checking.

• the suction power is reduced

- the dust bag may be full and needs replacing,

see page 3.

- the filter may be clogged and needs shaking,

see page 3.

• the vacuum cleaner stops Only USA and Canada

- the thermal cut-out has switched off the motor as a result

of an obstruction of the hose, wand or nozzle.

- Start by remove the electrical main cord from the power

outlet.

- When the machine is unplugged remove the cause

of the obstruction.

- Wait at least 5-10 minutes.

- Put back the electrical cord to the power outlet.

- When the motor is cool, it will automatically start again.

• the motor will not stay locked in position on the

container Only 90

- The red locking lever in the container top is in the wrong

position. Push the lever in the direction of the arrow.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk gs 90 s in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nilfisk gs 90 s Manual

Product: