72023
16
Zoom out
Zoom in
Previous page
1/48
Next page
16
5 Hose and tubes
1 Fitting hose to the curved tube
Slide the hose into the curved tube and adjust by turning
until locking levers grip into position.
2 Removing hose from curved tube
You may wish to remove the hose from the curved tube so
that you can easily remove a blockage.
Push one of the locking levers with a scnewdriver, as
illustrated. Tip the locking lever until it is released.
Repeat on the other locking lever. The curved tube can now
be separated from the hose.
Models with telescopic tube
The telescopic tube can be adjusted to suit your height.
3 Unlock the tube as illustrated in the diagram and pull to the
desired lenght.
4 Lock the tube as illustrated.
All models
5 Slide the curved tube into the steel tube.
6 Suction power regulation
1The suction power of the nozzle can be regulated by the slide
valve on the curved tube. Suction is most powerful when the
valve is pushed forward to close the inlet.
2 For cleaning of e.g. Ioose covers and curtains, the suction
power can be reduced by sliding the valve backwards.
7 Shaking the filter
To keep suction power at a constant level the filter must be
kept as clean as possible by shaking it at regular intervals.
The filter must not be washed or brushed.
Removing the motor 80
1 Hold the motor handle and open the top catches.
Lift off the motor.
2 Pull out the filter by its bottom plate and shake it gently from
side to side. The hose must remain fixed to the container
during the shaking operation.
The filter can be cleaned by vacuum it.
Removing the motor 90
1 Dismantle the motor by turning its handle anticlockwise. Lift
off the motor.
Emptying the container
When the filter has been shaken and the hose detached,
release the two latches and open the container. Lift off the top
part and empty the lower part of the container.
Replacing the motor 80
When mounting the motor make sure that the switch is directly
over the suction inlet of the container and the plug is turned
backwards.
Replacing the motor 90
2 Reset the motor so that the on/off switch is opposite the
motor mounting mark on the container and the plug is turned
backwards. Turn the motor clockwise until a distinct click
is heard. If the motor will not lock into position by turning,
then press the red locking lever inside the container in the
direction of the arrow.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk GM 80 C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk GM 80 C in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info