22352800. Replacement of the rear wheels A-0.6.5.
17
ASSEMBLY INSTRUCTIONS KING 500 SERIES
Instruction No. 82362100/00-08
To be performed by a skilled
or instructed person only !
Disconnect the vacuum cleaner
from the power supply before
starting the work!
! Models with bag-full indicator:
Open the dust cover until it stops
and continue with a little pressure
by hand until it slides free of the
hinges.
Models with no bag-full indicator:
Open the dust cover and lift it out
of the hinges.
Remove filter with dust bag.
Remove the dust bag holder by
pressing bottom clip and ease the
holder out of the bottom. This
releases the hook at the container
wall.
@ To separate the top and bottom
housing and avoid scratches on the
parts, place tool no. 22361400
under the buffer.
Follow instruction 82361500.
Remove the strap by hand or tool
no. V 33581. Lift up the buffer and
remove the top housing.
# Free the cord with plug from the
terminal box in the top housing by
using a Pozi screwdriver no. 2. Lift
away the upper housing.
Remove the cord reel and lock the
cord to the reel.
Unscrew from top the screw for the
wheel with a Torx T 20 screwdriver
and remove the shaft with wheel
from the bottom side.
Mount the new wheel with shaft by
the use of a small screwdriver and
a Torx T 20 screwdriver.
Mount shaft into wheel and
place a small screwdriver
through the hole for the metric
screw. Push wheel with shaft
and a small screwdriver into the
groove for wheel from the bot-
tom side with small screwdriver
pointing through the metric hole.
When screw is positioned from
the upper side, the screw will
push out the small bottom
screwdriver.
Replace cords reel and lift the
upper housing back on top of
the bottom housing. Press the
buffer in place by hand after
mounting the strap around the
housings.
Replace the accessory cover
and lock the dust cover.
WE
Q
12
