316920

Nilfisk gm 200 Manual

13
Zoom out
Zoom in
Previous page
1/32
Next page
22226000. Replacement of the buttons for dust cover (1), cable reel (3) and on/off (4)
A-0.6.5
22226300. Replacement of the buttons for two speed regulation (6) and on/off (8)
13
218580xx. Replacement of the top housing (12)
223535xx. Replacement of the top housing King
22352900. Replacement of the On/Off button (4)
22352901. Replacement of the On/Off button two speed (8) with activator (7)
22353100. Replacement of the activator for cord reel
22353200. Replacement of the activator for On/Off
22353900. Replacement of the buttons for dust lid (1), cable reel (3) with pivots (2)
ASSEMBLY INSTRUCTIONS GM 200 / 300 / 400 & KING 500 SERIES
Instruction No. 82226401/00-08
To be performed by a skilled
or instructed person only !
Disconnect the vacuum cleaner
from the power supply before
starting the work!
Removal of the dust cover
button (1), cable reel button (3)
and on/off button (4) for one
speed models
Open the accessory cover until it
stops and continue with a little
pressure by hand until it slides free
of the hinges and remove it.
Open the dust cover lid.
! Push down the cable release
button (a) and press by hand the
dust cover button sideways (b) to
release it, and lift it up (c).
@ Release and remove the side
pivots (2) with a pair of pliers (5). To
remove the cable reel (3) and/or
the on/off button (4), press the two
snaps on the button to release it
from the top housing & lift it away
after turning it 30 degrees.
# How to disassemble
the machine
Open the accessory cover until it
stops and continue with a little
pressure by hand until it slides free
of the hinges and remove it.
Models with bag-full indicator:
Open the dust cover (9) until it
stops and continue with a little
pressure by hand until it slides free
of the hinges.
Models with no bag-full indicator:
Open the dust cover (9) and lift it
out of the hinges.
Remove filter with dust bag.
Remove the dust bag holder (10)
by pressing bottom clip and ease
the holder out of the bottom. This
releases the hook at the container
wall.
To separate the top and bottom
housing and avoid scratches on
the parts, place tool no. 22361400
(11) under the buffer.
3
1
4
5
2
9
10
2
E
12
a
b
c
Q
W
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk gm 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk gm 200 in the language / languages: English as an attachment in your email.

The manual is 3,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info