Manual Nilfisk extremex100 (page 8 of 96) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

319098

Zoom out

Zoom in

1/96

Extreme

Changing the active carbon ﬁ lter

The active carbon ﬁ lter removes bad

smell from the exhaust air. Change the

active carbon ﬁ lter 1-2 times a year.

The active carbon ﬁ lter is located

behind the dust bag and preﬁ lter.

Always use original dust bags and

ﬁ lters.

1. Release the hose connection from

the suction inlet by turning the

hose connection counter-clockwise

and then remove it.

2. Open the lid by pushing the button.

3. Seal the dust bag by pulling the

cardboard ﬂ ap.

4. Remove the dust bag.

5. Take out the ﬁ lter holder.

6. Remove the old active carbon ﬁ lter.

7. Fit the new active carbon ﬁ lter.

8. Insert the ﬁ lter holder on the pin

and push in place.

9. Insert the dust bag. If the dust bag

is closed push the cardboard ﬂ ap

down to open it. Check that the

dust bag is correctly ﬁ tted.

10. Close the lid.

11. Insert the hose connection into the

suction inlet and twist it clockwise

to lock it.

Changing the HEPA ﬁ lter

The HEPA ﬁ lter cleans the exhaust

air from micro particles the dust bag

can not keep. The HEPA ﬁ lter can

not be brushed or washed clean. The

X150, X200, X210, X250 and X300

models have an HEPA ﬁ lter indicator

that shows when to change the HEPA

ﬁ lter. Always use original dust bags

and ﬁ lters.

1. Open the lid on the machine under-

side with a coin or a screw driver.

2. Take out the HEPA ﬁ lter.

3. Insert the new HEPA ﬁ lter. Check

that the HEPA ﬁ lter is correctly

ﬁ tted.

4. Put the lid back and close it with a

coin or a screw driver.

Adjust the suction power

Models with a sliding valve on the

hose handle - Eco, X100, X110,

X150, X200 and X210

The suction power is maximal with

the sliding

valve closed

and minimal

when all open.

Adjust the

suction power

by putting the

sliding valve

in the desired

position.

Models with three step adjustment

- X150, X200 and X210

The suction power

is adjusted with

the sliding valve

and also with the

touch control on

the machine.

Models with ﬁ ve step adjustment

remote control - X250, X300

The suction power

is adjusted on the

remote control on

the hose handle.

Hose handle with

remote control

battery replacement,

battery type CR2032

1. Carefully remove the remote control

unit with a small, ﬂ at tool.

2. Remove the old

battery - replace

with new type

CR2032.

3. Carefully reas-

semble the con-

trol unit back to

the hose handle

by pushing it in

place at handle.

Eco, X100, X110,

X150, X200, X210

X250, X300

X150, X200, X210

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk extremex100 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nilfisk extremex100 Manual

Product: