315967

Nilfisk extreme 110 Manual

8
Zoom out
Zoom in
Previous page
1/96
Next page
8
Extreme
DE
FR
ES
PT
I
T
NL
SV
NO
DA
FI
EN
Changing the active carbon fi lter
The active carbon fi lter removes bad
smell from the exhaust air. Change the
active carbon fi lter 1-2 times a year.
The active carbon fi lter is located
behind the dust bag and prefi lter.
Always use original dust bags and
fi lters.
1. Release the hose connection from
the suction inlet by turning the
hose connection counter-clockwise
and then remove it.
2. Open the lid by pushing the button.
3. Seal the dust bag by pulling the
cardboard fl ap.
4. Remove the dust bag.
5. Take out the fi lter holder.
6. Remove the old active carbon fi lter.
7. Fit the new active carbon fi lter.
8. Insert the fi lter holder on the pin
and push in place.
9. Insert the dust bag. If the dust bag
is closed push the cardboard fl ap
down to open it. Check that the
dust bag is correctly fi tted.
10. Close the lid.
11. Insert the hose connection into the
suction inlet and twist it clockwise
to lock it.
Changing the HEPA fi lter
The HEPA fi lter cleans the exhaust
air from micro particles the dust bag
can not keep. The HEPA fi lter can
not be brushed or washed clean. The
X150, X200, X210, X250 and X300
models have an HEPA fi lter indicator
that shows when to change the HEPA
fi lter. Always use original dust bags
and fi lters.
1. Open the lid on the machine under-
side with a coin or a screw driver.
2. Take out the HEPA fi lter.
3. Insert the new HEPA fi lter. Check
that the HEPA fi lter is correctly
fi tted.
4. Put the lid back and close it with a
coin or a screw driver.
4
Adjust the suction power
Models with a sliding valve on the
hose handle - Eco, X100, X110,
X150, X200 and X210
The suction power is maximal with
the sliding
valve closed
and minimal
when all open.
Adjust the
suction power
by putting the
sliding valve
in the desired
position.
Models with three step adjustment
- X150, X200 and X210
The suction power
is adjusted with
the sliding valve
and also with the
touch control on
the machine.
Models with fi ve step adjustment
remote control - X250, X300
The suction power
is adjusted on the
remote control on
the hose handle.
Hose handle with
remote control
battery replacement,
battery type CR2032
1. Carefully remove the remote control
unit with a small, fl at tool.
2. Remove the old
battery - replace
with new type
CR2032.
3. Carefully reas-
semble the con-
trol unit back to
the hose handle
by pushing it in
place at handle.
5
5b
Eco, X100, X110,
X150, X200, X210
X250, X300
X150, X200, X210
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk extreme 110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk extreme 110 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info