Manual Nilfisk E 160.1 (page 3 of 15) (English)

728836

Zoom out

Zoom in

1/15

Original instructions

•

The operator and any one in the immediate vicinity

of the site for cleaning should take action to pro-

tect oneself from being struck by debris dislodged

during operation.

• Always wear safety boots, respiratory mask, ear

protection, goggles and protective clothing during

operation.

• The high pressure generated by the machine is a

particular source of danger. Hold the spray lance

rmly with both hands. The spray lance is aected

by a kickback force and a sudden torque during

operation.

• See PART 3:3 for the actual size of the kickback

force.

• During transportation: Position the machine hori-

zontally on the backside and secure with straps.

Within EU

•

High pressure washers shall not be used nor main-

tained by children. The machine can be used by

people with reduced physical, sensory or mental

capabilities or lack of experience and knowledge

if given supervision or instructions concerning use

of the machine in a safe way and understands the

hazards involved.

Outside EU

•

High pressure washers shall not be used nor main-

tained by children or untrained people or people with

reduced physical, sensory or mental capabilities

or lack of experience and knowledge.

Part 2:3 - User Guide

Provides a general overview of the machine and

operation elements along with illustrated sections on

preparation, operation, water connection, storage,

and user maintenance.

A Unpacking and preparing for use

Follow illustrations in A.

B Connection to potable water mains

High pressure washers are not suitable for con-

nection to the potable water mains. Always check

national regulations before connecting the machine

to potable water mains and use a back-ow preventer

if required.

• Use ½" garden hose, 10-25 m.

• Follow illustrations in B.

C Connection to other water sources

You can connect the machine to e.g. rain water ves-

sels, rivers, lakes and cisterns etc. and operate it in

suction mode. Follow illustrations in C.

D Pairing of spray handle and machine

C-PG and D-PG series only. After battery insert, D1.1,

you have 2 min. to pair spray handle and machine.

The light will ash orange when searching for the

machine. When paired, the light will turn o. Follow

illustrations D1.1 to D1.5. If pairing aborts, do pair-

ing according to illustrations D2.1 to D2.5. Power

regulation is indicated by green light, see illustration

D3.1 and D3.2.

Leaving the machine unattended > 5 min.

See listed warnings. Follow the illustrations in E.

F After use and storage

After use always: Turn o the machine. Empty ma-

chine and accessories of water to avoid frost damage.

Remove the plug from socket. Disconnect water inlet

hose. Wind up electrical cable and high pressure

hose to avoid damage of cable, high pressure hose

and ttings. Storage of machine shall be frost free.

• Follow illustrations in F.

G Maintenance, inspection and repair

Maintenance of the machine should always be done

when starting up after long time of storage.

Before use, always inspect the machine and

equipment for damages. In case of damages, act

according to listed warnings.

•

Do not attempt any maintenance not described

in the instructions. If the machine refuses to start,

stops, pulsates, pressure uctuates, motor buzzes,

fuse blows or no water comes out, check the trouble

shooting diagram at our website www.get-started.

nilsk.com. Any repair should always be made in

Nilsk authorized workshop with original Nilsk

spare parts.

• User maintenance according to illustrations in G.

About Nilfisk E 160.1 the pressure is gone and water coming slowly out and also from the conections are leaking.
Regards,
Tom
tom.malmsten@gmail.com Submitted on 18-12-2020 at 11:05
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk E 160.1 in the language / languages: English as an attachment in your email.

The manual is 3,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nilfisk E 160.1

Nilfisk E 160.1 User Manual - German - 16 pages

Nilfisk E 160.1 User Manual - Dutch - 15 pages

Nilfisk E 160.1 User Manual - French - 16 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nilfisk E 160.1 Manual

Product: