Manual Nilfisk E 150.2 (page 2 of 15) (English)

728835

Zoom out

Zoom in

1/15

Original instructions

The instruction consists of 3 parts. Part 1:3 Safety

Instructions. Part 2:3 User Guide. Part 3:3 Technical

Data and Declaration.

Part 1:3 - Safety Instructions

Before rst use of the machine, read the instruc-

tions carefully. Save instructions for later use.

Safety instructions marked with this symbol

must be observed to prevent personal injury

or serious damage to property.

WARNING

This machine has been designed for use with

cleaning agents supplied or recommended by Nilsk.

The use of other cleaning agents or chemicals may

adversely aect the safety of the machine.

High pressure jets can be dangerous if

subject to misuse. The jet must not be direct-

ed at persons, live electrical equipment or

the machine itself.

Do not use the machine within range of persons

unless they wear protective clothes.

Do not direct the jet against yourself or others in

order to clean footwear.

Risk of explosion – Do not spray ammable liq-

uids. High pressure washers shall not be used

by children or untrained personnel.

High pressure hoses, ttings and couplings are

important for the safety of the machine. Use only

hoses, ttings and couplings recommended by Nil-

sk.

To ensure machine safety, use only original spare

parts recommended by Nilsk.

Water that has own through back-ow preven-

ters is considered to be non-potable.

Don’t use the machine if a supply cord or impor-

tant parts of the machine are damaged, e.g. safety

devices, high pressure hoses, trigger gun.

Inadequate extension cords can be dange rous.

If an extension cord is used, it shall be suitable for

outdoor use, and the connection has to be kept dry

and o the ground. It is recommended that this is

accomplished by a cord reel which keeps the sock-

et at least 60 mm above the ground.

Switch o and unplug the machine when leaving

it unattended, when nished using it or when con-

verting it to another function, when doing repair and

maintenance.

During use of high pressure washers, aerosols

may be formed. Inhalation of aerosols can be haz-

ardous to health, for the protection against aerosols

a respiratory mask of class FFP 2 or equivalent may

be needed, depending on the cleaning environment.

Intended Use and Terms of Liability

• The C-, D-, E- and P-series have been developed

for domestic cleaning pur poses only and for use

in an upright position. Any other use is considered

as improper use.

•

A high pressure washer operates with dierent

levels of pressure and cleaning detergents for

various cleaning tasks and results. Always follow

instructions on detergents for use, emergency

and disposal.

• Do not operate the machine at temperatures be-

low 0°C. Never start a frozen machine, never use

it indoor and never cover it during use. This is

considered improper and wrongful use. Use of

wrongful pressure, detergent and/or applications

may cause damage to machine, surfaces, material

and devices.

All of the above is considered improper and wrong-

ful use. Nilsk accepts no liability for any damage

resulting from any improper or wrongful use.

Please refer to our website at www.get-started.nilsk.

com for further instructions and information on use,

emergency and disposal.

Safety devices and their functioning

The machine automa tically stops when releasing

the trigger. The machine will start again when re-

activating the trigger. The spray handle features a

locking device. When activated, the spray handle

cannot be operated.

The machine has an automatic self-resetting thermal

protector. If the machine is overheated, the thermal

protector will cut the power supply. In this case, wait

for the machine to cool down. An integrated hydrau-

lic safety valve protects the system from excessive

pressure.

Precautions

The electric supply connection shall be made by a

qualied electrician and comply with IEC 60364-1.

It is recommended that the electric supply to this

machine should include either a residual current

device that will interrupt the supply if the leakage

current to earth exceeds 30 mA for 30 ms or a device

that will prove earth circuit.

•

Use motor start/delayed fuses with characteristic D

according to IEC 947-2 or corresponding standards

outside IEC.

• If the supply cord is damaged, it must be replaced

by an authorized Nilsk distributor or similar qual-

ied person in order to avoid a hazard.

•

No actions needed for adjusting machines marked

with dual voltage and frequency.

• Supervise children not to play with the machine.

Machine just stopped! Been through all obvious faults i.e. fuse, mains cb, waited for thermal reset……… motor seems dead?
Looked for a reset button but appears not to be one? Submitted on 30-5-2022 at 19:03
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk E 150.2 in the language / languages: English as an attachment in your email.

The manual is 3,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nilfisk E 150.2

Nilfisk E 150.2 User Manual - German - 16 pages

Nilfisk E 150.2 User Manual - Dutch - 15 pages

Nilfisk E 150.2 User Manual - French - 16 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nilfisk E 150.2 Manual

Product: