586759
11
Zoom out
Zoom in
Previous page
1/22
Next page
11Original Instructions
EN
DA
NO
SV
FI
DE
FR
NL
I
T
ES
PT
E
L
R
C
S
H
U
P
L
HR
SL
SK
L
V
LT
ET
R
U
Z
H
4 Operating your high pressure washer
See the pictorial quick reference guide – operating your high pressure washer.
4.1 Connection of high pressure hose
B1 Attach the high pressure hose (4) to the spray handle (7). Detach the high pressure hose
by pressing the pawl (A).
B2 Mount the high pressure hose on the outlet (3).
4.2 Mounting of spray lance and Click&Clean nozzles
B3 Push the spray lance (6) into the spray handle (7), twist and release.
NOTE!
The spray lance has a built-in low pressure nozzle that can be used for fl ushing away
dirt.
B4 When attaching the nozzles (8, 9), press the nozzles into the spray lance.
IMPORTANT!
When attaching the click & Clean nozzles, the pawl on the side of the spray lance should come
out again. The nozzle should stay in position when pulling it.
B5 Push the foam sprayer (10) into the spray lance (6).
NOTE!
The foam sprayer features a swivel lock, which must be positioned in the hole in the Click &
Clean spray lance. Press the pawl to detach the Click & clean nozzles and the foam sprayer.
IMPORTANT!
Before starting the cleaning job, check that the machine is in an upright position and placed on
an even surface. Do not place the machine in long grass!
4.3 Water Connection
IMPORTANT!
Connecting to pressurized water supply
The inlet water max. pressure is 1 MPa/10 bar and the max. temperature is 60°C – see rating
plate. An ordinary ½" garden hose of min. 10 m and max. 25 m will be suitable.
B6 Check that the fi lter is fi tted in the water inlet pipe and that it is not clogged up.
B7 Connect the water hose to the water supply by means of the quick connector. Turn on the
water.
Connection to the drinking water mains according to national and local regulations.
Let the water run through the water hose before connecting it to the machine to prevent sand
and dirt from penetrating the machine.
B8 Turn off the water and connect the water hose by means of the quick coupling to the wa-
ter inlet.
Connecting to pressure less water supply
The machine can also operate in suction mode, meaning that you can connect the machine to
e.g. rainwater vessels, rivers, lakes and cisterns etc. When taking in water from non drinking
water mains the backfl ow preventer is not needed.
B
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk E 145.3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk E 145.3 in the language / languages: English as an attachment in your email.

The manual is 1,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nilfisk E 145.3

Nilfisk E 145.3 User Manual - German - 24 pages

Nilfisk E 145.3 User Manual - Dutch - 24 pages

Nilfisk E 145.3 User Manual - French - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info