586757
15
Zoom out
Zoom in
Previous page
1/22
Next page
15Original Instructions
EN
DA
NO
SV
FI
DE
FR
NL
I
T
ES
PT
E
L
R
C
S
H
U
P
L
HR
SL
SK
L
V
LT
ET
R
U
Z
H
6 After using the pressure washer
See the pictorial quick reference guide – storing the high pressure washer.
The high pressure washer should be stored in a frost free room! Should the machine by a mis-
take be frozen, it will be necessary to check it for damages.
6.1 Stopping the high pressure washer
C1 Shut off the water supply and activate the trigger of the spray handle and let the machine
run until no more water runs out of the nozzle. This will wash out water hose, high pres-
sure hose, spray lance and nozzles.
C2 Stop the machine, turning the start/stop switch to position "0".
C3 Unplug the machine from the power supply socket.
IMPORTANT!
To avoid accidents, the electric cable and the high pressure hose should always be wound up
carefully.
C4 Wind up the electric cable on the dedicated cable hook (18). The upper hook can be
turned to release the electric cable. The upper hook has a built-in clip for good holding of
the electrical cable.
C5 The high pressure washer comes in two models: A) with hook for storage of high pres-
sure hose (15) - B) with a hose reel (12).
C6 Rinse the spray lance, nozzles and the foam sprayer after use.
C7 Place spray handle (f), lance (a), nozzles (b), foam sprayer (c) in the holders on the high
pressure washer. The nozzle cleaning tool (d) and a Click & Clean brush (e) can also be
stored on the product.
7 Maintenance
See the pictorial quick reference guide - maintenance.
To ensure a long and problem free working life of the high pressure washer, please take the
following advices:
Wash out water hose, high pressure hose, spray lance and accessory before mounting
Clean the connectors of dust and sand
Rinse the detergent bottle and the detergent nozzle
Clean the nozzle
Keep the water inlet fi lter clean and unclogged
Cleaning of the water inlet fi lter
D1 Clean the water inlet fi lter regularly once a month or more frequently according to use.
Carefully loosen the fi lter with a screwdriver and clean it. Check that it is intact before remount-
ing it.
Cleaning of nozzle
A clogging up in the nozzle causes a pump pressure which is too high, why cleaning is re-
quired immediately.
IMPORTANT!
The nozzle cleaning tool (11) should only be used when the nozzle is detached and the ma-
chine is stopped!
D2 Stop the machine and disconnect the nozzle. Clean the nozzle.
I
O
C
D
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk E 130.3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk E 130.3 in the language / languages: English as an attachment in your email.

The manual is 1,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nilfisk E 130.3

Nilfisk E 130.3 User Manual - German - 24 pages

Nilfisk E 130.3 User Manual - Dutch - pages

Nilfisk E 130.3 User Manual - French - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info