586756
12
Zoom out
Zoom in
Previous page
1/23
Next page
12
Original Instructions
EN
DA
NO
SV
FI
DE
FR
NL
I
T
ES
PT
E
L
R
C
S
H
U
P
L
HR
SL
SK
L
V
LT
ET
R
U
Z
H
B8 Turn off the water and connect the water hose by means of the quick coupling to the wa-
ter inlet of the machine.
Connecting to pressure less water supply
The machine can also operate in suction mode, meaning that you can connect the machine to
e.g. rainwater vessels, rivers, lakes and cisterns etc. When taking in water from non drinking
water mains the backfl ow preventer is not needed.
When connecting the machine to operate from pressure less water supplies – always use ad-
ditional fi ltering to secure that impurities are not sucked in. Hose length should be max. 3 meter
and of minimum ½".
To meet these requirements, Nilfi sk recommends that you use the original Nilfi sk suction hose
kit.
The Machine is designed for suction up to 0.5 meter above water surface.
Position the machine at max. 0.5 meter above the water surface. Detach the high pressure
hose from the outlet.
Ensure that the inlet fi lter is in position and attach the suction hose kit, secure tight connec-
tion to the inlet.
Turn on the machine, turning the start/stop switch (1) to position "I".
Wait until a steady jet exits the outlet.
Switch off the machine and attach high pressure hose (4), spray handle, lance and nozzle.
Start the machine again and activate the spray handle.
4.4 Starting the high pressure washer
IMPORTANT!
Connecting to mains power supply
The voltage and frequency of the machine (see model tag (15)) must match the voltage and
frequency of the power supply.
Connecting the high pressure washer to a supply system, the max allowed impedance is =
0,29+j0,18 (Zmax). Consult with the supply authority that the equipment is connected only to
a supply of that impedance or less.
B9 Insert the power plug into power supply socket.
B10 Turn on the water.
B11 Release the trigger lock (7a). Remember to unplug, turn off the high pressure washer and
lock the trigger, when leaving the high pressure washer unattended
B12 Activate the trigger of the spray handle and let the water run until all air has escaped from
the water hose.
B13 Turn on the machine, pressing the start/stop switch to position "I".
B14 Activate the trigger of the spray handle. When releasing the trigger of the spray handle,
the machine automatically stops. The machine will start again when you reactivate the
trigger of the spray handle.
4.5 Pressure regulation on the TORNADO® PR- nozzle
B15 The pressure can be regulated on the TORNADO
®
PR nozzle.
4.6 Stationary use
B16 If mounting a special wall hook (not standard), the pressure washer can be used as a
stationary solution meaning that it can be operated while hanging on the wall.
Only mount the wall hook on a sturdy wall. Adjust the length of the screws and size of
rawlplugs to the type of wall.
B17 On the wall hook Multi Brush (a) foam sprayer (b), Click & Clean brush (c) and Click &
Clean nozzles (d) can be stored.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk C-PG 130.2 X-TRA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk C-PG 130.2 X-TRA in the language / languages: English as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nilfisk C-PG 130.2 X-TRA

Nilfisk C-PG 130.2 X-TRA User Manual - German - 24 pages

Nilfisk C-PG 130.2 X-TRA User Manual - Dutch - 24 pages

Nilfisk C-PG 130.2 X-TRA User Manual - French - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info