586755
10
Zoom out
Zoom in
Previous page
1/23
Next page
10
Original Instructions
EN
DA
NO
SV
FI
DE
FR
NL
I
T
ES
PT
E
L
R
C
S
H
U
P
L
HR
SL
SK
L
V
LT
ET
R
U
Z
H
3 Before you start using your high pressure washer
See the pictorial quick reference guide – unpacking.
Illustration shows the operation elements and how to prepare your machine for use.
Operation elements
1 Start/stop switch
2 Water inlet (with fi lter)
3 High pressure connection
4 High pressure hose
5 Electric cable
6 Click & Clean spray lance
7 Spray gun with lock (7a)
8 Click & Clean Tornado
®
PR nozzle
9 Click & Clean Powerspeed
®
nozzle
10 Click & Clean foam sprayer
11 Nozzle cleaning tool
12 Trolley Handle
13 Hose reel (not standard)
14 Hose hook / cable hook
15 Model tag
16 Warning sign
17 Quick coupling
3.1 Mounting of trolley handle, hose hook and hose reel
Mounting of trolley handle and hose hook (standard modelsl)
A1 Mount the trolley handle (12) on the machine. Mount the hose hook (14) on the handle.
Mounting of trolley handle and hose reel (models with hose reel)
A2 Mount the trolley handle (12) on the machine. Mount the hose reel (13) on the handle.
3.2 Mounting of quick coupling
A3 When mounting the quick coupling for the fi rst time, check that the factory fi tted fi lter is
positioned in the water inlet pipe.
IMPORTANT!
The inlet fi lter must always be fi tted in the water inlet pipe to fi lter out sand, lime stone and other
impurities as these will damage the pump valves. The fi lter is factory fi tted.
If the fi lter is removed this will invalidate the guarantee.
3.3
Mounting of Battery (Cell battery – CR 2032) – Only for models with Wireless regulation
A4 Unscrew (1) the lid (2) to access the battery compartment in the wireless spray handle.
Gently push the battery (3) into the battery holder (4), + sign facing upwards as
illustrated.
Mount the lid (1) to the battery compartment (2). Make sure that the lid gasket (3) is still
placed properly in the groove at the spray handle.
A5 When the battery is mounted correctly, the orange LED (1) will fl ash for two minutes or
until the spray handle has been paired with the machine. If pairing is not executed within
2 min., the spray handle enters into stand-by mode (battery saving) -> for pairing see
section 4.7.
If in standby mode and no pairing is in place, then the pairing process can be revital-
ized by pressing the up/down keys to activate the spray handle. Orange LED will then
ash until pairing is completed or resuming standby mode.
A
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk C 130.2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk C 130.2 in the language / languages: English as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nilfisk C 130.2

Nilfisk C 130.2 User Manual - German - 24 pages

Nilfisk C 130.2 User Manual - Dutch - 24 pages

Nilfisk C 130.2 User Manual - French - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info