Manual Nilfisk-ALTO UNO BOOSTER EXTENDED (page 5 of 28) (English)

609107

Zoom out

Zoom in

1/28

UNO / DUO BOOSTER EXTENDED

Original Instructions

during operation or use it

in a room without adequate

ventilation !

If the overload protection device

of the motor trips (motor stops),

release the trigger of the spray

handle. Lock the spray handle

with locking device and turn the

start/stop switch to position „0“.

Let the machine cool off for at

least 3 minutes!

The machine must be

placed in a room where

it is not exposed to frost.

Operation

Avoid damage to the electric

cables such as running over

by a car, squeezing, pull, knots

etc. and keep them away from

sharp or hot objects.

Avoid damage to the high

pressure hose such as running

over by a car, squeezing, pull,

knots/kinks etc. and keep it

away from oil and sharp or hot

objects, as such may cause the

hose to burst.

The cleaner can be used in

zones classiﬁ ed as ZONE 2.

Important! Never use the

machine in an environment

where there could be a danger

of explosion (according to EN-

50014).

Important! When the system

has been in operation and

thereafter stopped, there will

still be a working pressure in

the pipeline and high pressure

hoses. Therefore you should

pay special attention to the

following:

• Never dismount the high

pressure hose from the

machine during operation.

Disconnect the machine,

close the shut-off cock and

relieve the high pressure

hose of pressure prior to

dismounting.

• Never dismount the high

pressure hose from the outlet

point before it has been

securely closed and the high

pressure hose has been

relieved of pressure.

• Prior to any service

interference in the machine

it should be disconnected

and the system relieved of

pressure by activating the

trigger of the spray handle.

Repair and Maintenance

Only carry through the

maintenance operations

described in the operating

instructions. Only use original

Nilﬁ sk-ALTO spare parts.

Do NOT make any technical

modiﬁ cations to the high

pressure washer.

Warning! High pressure

hoses, nozzles and couplings

are important for the safety

when operating the machine.

Only use the high pressure

hoses, nozzles and couplings

prescribed by Nilﬁ sk-ALTO!

For major repairs, please

contact your nearest Nilﬁ sk-

ALTO service organisation.

Mains power connection

Check the nominal voltage

of the high pressure washer

before connecting it to the

electricity supply.

Check that the voltage stated

on the model tag corresponds

to your mains voltage.

A circuit breaker must be

placed in the immediate vicinity

of the machine.

We recommend you to connect

the machine to a power source

with a Residual Current Device

(RCD) which will disconnect

the power supply if the leakage

current exceeds 30 mA for 20

milli seconds.

Only connect to an approved

socket with earth connection.

Only connect the machine to an

electrical installation made by

an qualiﬁ ed electrician.

The insulation of the electric

cable should be quite faultless

and without any cracks.

If you are in doubt about the

the mains power connection,

please contact a qualiﬁ ed

electrician.

Note: If using another cable it

must be earthed and connected

through the plug to the earth

cable of your supply network

in accordance with prescribed

safety regulations.

Always use a cable similar

to the one mounted on the

machine.

Check cables before usage. Do

not use damaged cables.

Only let a qualiﬁ ed electrician

replace the electric cable.

Safety Devices

Safety Valve

The pressure side of the high

pressure pump is ﬁ tted with a

safety valve. This valve leads

the water back to the suction

side of the pump when the

spray handle is closed or if a

nozzle is blocked.

The safety valve is adjusted

and sealed by the producer.

THIS ADJUSTMENT MUST

NOT BE CHANGED !

Motor protection

The motor features an

overcurrent protection and

built-in thermal switches for

protection of motor against

overloading. In the event of

increased power consumption

(maloperation), the current for

the motor will automatically be

cut out.

Please advise the lubrication oil type(brand) used for our Nilfisk Alto Duo Booster HP Machine. Submitted on 25-7-2020 at 16:22
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk-ALTO UNO BOOSTER EXTENDED in the language / languages: English as an attachment in your email.

The manual is 1,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nilfisk-ALTO UNO BOOSTER EXTENDED

Nilfisk-ALTO UNO BOOSTER EXTENDED Additional guide - English - 2 pages

Nilfisk-ALTO UNO BOOSTER EXTENDED User Manual - German - 29 pages

Nilfisk-ALTO UNO BOOSTER EXTENDED Additional guide - Dutch - 2 pages

Nilfisk-ALTO UNO BOOSTER EXTENDED User Manual - Dutch - 30 pages

Nilfisk-ALTO UNO BOOSTER EXTENDED Additional guide - French - 2 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nilfisk-ALTO UNO BOOSTER EXTENDED Manual

Product: