609319
10
Zoom out
Zoom in
Previous page
1/31
Next page
10
TRUCK BOOSTER
Original Instructions
d
c
ON
/
+
%
3
#
-
)
435
"
)
3
(
)
$#
).054
!
"






3
4
3.7 Venting
When the TRUCK BOOSTER
is properly connected to sup-
ply water, electrical installation
and a high-pressure hose (or
pipeline) the high-pressure
pump must be vented before it
is operational.
1. Turn the main switch, (2) to
position “ON”.
2. Push the “START” but-
ton (3), and the TRUCK
BOOSTER will start.
3. Open the outlet point (spray
handle on high-pressure
hose, (c) or outlet on piping
system (d) without having a
spray lance connected.
4. Let the water run until all air
has escaped from the pump
(even water fl ow).
5. In the case of a recently
installed piping system,
or if the pipeline and the
pump have been emptied in
any other way, the system
should be vented by starting
the pump and then letting
the water run at each outlet
point of the pipeline at turns.
It is recommended to begin
with the most distant outlet
(height and/or length).
6. When connecting the high-
pressure hose directly to
the machine, starting the
pump and activating the
trigger of the spray handle
without having attached the
spray lance, should vent the
system.
7. Stop the TRUCK BOOSTER
by pressing the “STOP” push
button (4).
The TRUCK BOOSTER is now
vented.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk-ALTO Truck Booster at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk-ALTO Truck Booster in the language / languages: English as an attachment in your email.

The manual is 2,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nilfisk-ALTO Truck Booster

Nilfisk-ALTO Truck Booster User Manual - German - 31 pages

Nilfisk-ALTO Truck Booster User Manual - Dutch - 31 pages

Nilfisk-ALTO Truck Booster User Manual - French - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info