609451
79
Zoom out
Zoom in
Previous page
1/124
Next page
9097058000(2)2009-10 A SCRUBTEC 653B – 653BL – 651BCL – 661BL 17
USER MANUAL
ENGLISH
Types of cylindrical brushes available
485 mm-models
POLYPROPYLENE 0.40
HARD NYLON 0.60
SOFT NYLON 0.45
Cylindrical brush application guide (suggestions only)
Models POLYPROPYLENE 0.40 HARD NYLON 0.60 SOFT NYLON 0.45
General cleaning:
Concrete
Terrazzo oor
Ceramic tiles/quarrystones
Marble
Vinyl tiles
Rubber tiles
Squeegee installation
1. Install the squeegee (25) and fasten it with the handwheels (26), then connect the vacuum hose (15) to the squeegee.
2. Adjust the squeegee with the handwheel (27) so that the rear blade - in all its length - touches the oor.
Guide to match squeegees and brush/pad-holder decks
Deck model Squeegee model
Deck with one brush (18a), brush diameter: 530 mm Aluminium (Fig. 7), width 760 mm
Deck with two brushes (18b), brush diameter: 305 mm Steel (Fig. 6), width 810 mm
Deck with two cylindrical brushes (18c), brush length: 485 mm Aluminium (Fig. 7), width 760 mm
Solution or washing water tank lling
NOTE
If the machine is equipped with Chemical Mixing System (switch (77) (optional)) the tank must be lled with clean water,
otherwise the tank must be lled with solution.
1. Open the ller neck (8).
2. (For machines without Chemical Mixing System)
Use the rear ller neck (41) or the front ller neck (37) to ll the tank (20) with a solution suitable for the work to be performed.
Do not ll the solution tank completely, leave a few centimetres from the edge. Use the removable hose (17) as reference.
Always follow the dilution instructions on the label of the chemical product used to prepare the solution.
The solution temperature must not exceed 40°C.
WARNING!
Use only low-foam and non-ammable detergents, intended for automatic scrubber applications.
(For machines with Chemical Mixing System)
Fill the tank (20) with clean water by using the rear ller neck (41) or the front ller neck (37).
Do not ll the clean water tank completely, leave a few centimetres from the edge.
The water temperature must not exceed 40°C.
79


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk-ALTO SCRUBTEC 653B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk-ALTO SCRUBTEC 653B in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 9,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info