609422

Nilfisk-ALTO SCRUBTEC 234 C Manual

44
Zoom out
Zoom in
Previous page
1/60
Next page
ENGLISH USER MANUAL
14 SCRUBTEC 234C - 9099346000
TROUBLESHOOTING
Trouble Possible Cause Remedy
There is no power supply. The motors do not
turn on.
The power supply cable is faulty or
disconnected from the electrical mains.
Replace the cable (*) or connect it.
There is a faulty switch on the panel. Replace the switch (*).
Dirty water vacuuming is insufcient or there is
no vacuuming.
The squeegees are dirty or the squeegee
blades are worn or damaged.
Clean or replace the squeegees.
The vacuum inlet is clogged. Clean.
The vacuum hose is disconnected or faulty. Clean, connect or replace.
The tank gasket is faulty. Replace.
The turbine pre-lter is dirty. Clean.
The solution ow is insufcient. The solution lter is dirty. Clean or replace.
The brush does not turn. The driving belt is loose or torn. Adjust or replace (*).
The brush is not properly installed. Install properly.
The brush motor is faulty. Replace (*).
The squeegee leaves marks on the oor.
There is debris under the squeegee blades. Remove the debris.
The squeegee blades are worn, chipped or
torn.
Replace the blades.
The oor is not sufciently cleaned. The brush is worn. Replace.
The brush is too soft. Use a harder brush.
The working speed is too fast. Work at a slowest speed.
(*) This maintenance procedure must be performed by Nilsk authorised Service Center.
For further information refer to the Service Manual, available at any Nilsk Service Center.
SCRAPPING
Have the machine scrapped by a qualied scrapper.
Before scrapping the machine, remove and separate the following materials, which must be disposed of properly according to the
Law in force:
– Brush
– Electrical and electronic components (*)
(*) Refer to the nearest Nilsk Center especially when scrapping electrical and electronic components.
… 44 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk-ALTO SCRUBTEC 234 C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk-ALTO SCRUBTEC 234 C in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info