609110
7
Zoom out
Zoom in
Previous page
1/16
Next page
Original instructions 7
Quick reference guide
This high pressure washer has been designed for
professional use typically in following cleaning ap-
plications:
floor/wall, auto/truck, buildings/constructions, con-
tainer/barrel and craftsman use.
The pictorial quick reference guide
The pictorial quick reference guide is designed for
helping you when starting up, operating and storing
the unit. The guide is subdivided into 5 sections.
A
Before starting
DO READ SAFETY INSTRUCTIONS BEFORE USE!
Operating elements:
1. Inlet water connection
2. Nipple for high pressure hose
3. Lifting handle
4. Hose holder
5. Cable
6. Oil plug
7. On/off switch
8. Oil reservoir
9. Lock for oil reservoir
10. Feet (rubber dampers)
11. Lance (2nd optional)
12. Holder for lance
13. Ergo 2000 spray handle
14. Child lock
15. Foam Sprayer
16. Holes for wall mounting (x2)
Wall mounting
Only mount the machine on a solid wall construction
suitable for machine assembly, for example a con-
crete or brick wall.
Do not install the machine where it can be an incon-
venience to adjoining rooms (canteen / office etc.).
Preparation for stationary use
1. Dismount rubber dampers, pos. 10.
2. Dismount oil plug, pos. 6.
3. Mount oil reservoir, pos. 8.
4. Mount lock for oil reservoir, pos. 9.
5. Top up with oil.
B
Switching on the unit
1.0 Connect hoses (water and high pressure
hose).
1.1 Mount the lance.
1.2 Connect the electrical cable to mains.
1.3 Check oil level.
1.4 Open water tap.
1.5 Switch on the high pressure washer.
1.6 Open child lock at spray handle.
1.7 Activate spray handle.
C
Control/operation
Using cleaning agents:
1.0 Check / clean hole in suction limiter at foam
sprayer.
1.1 Mount foam sprayer at canister.
1.2 Set spray angle horizontal/vertical.
1.3 Activate spray handle.
Adjust pressure at FlexoPower lance:
2.0 Turn the blue part of the nozzle head min./
max.
Hose and c able:
During use, cable and hose MUST be completely
unwound.
D
After using the unit
1.0 Switch off the high pressure washer.
1.1 Disconnect from mains.
1.2 Turn off the water.
1.3 Release pressure at spray handle
1.4 Set child lock.
E
Maintenance
1.0 Check / top up with oil to max (SAE 80W-90).
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk-ALTO SC UNO 4M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk-ALTO SC UNO 4M in the language / languages: English as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nilfisk-ALTO SC UNO 4M

Nilfisk-ALTO SC UNO 4M User Manual - German - 16 pages

Nilfisk-ALTO SC UNO 4M User Manual - Dutch - 16 pages

Nilfisk-ALTO SC UNO 4M User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info