493189
12
Zoom out
Zoom in
Previous page
1/34
Next page
12
1)
Options / model variants
Original instructions
POSEIDON 5-6-7
Installation guide
c c
3.7 BA valve
(a) Female
coupling
BA valve
(b) Male
coupling
Maintenance
1. Mount a male coupling on the water tap.
2. Connect (a) on the BA valve to the water tap.
3. Mount a female coupling on the water inlet hose.
4. Connect (b) on the BA valve to the water inlet hose.
5. Connect the water inlet hose to the high pressure washer.
6. Turn on the water and start the machine.
At least once a year, check the function as follows:
1. After work, switch off the high pressure cleaner.
2. Close the water tap valve.
3. Release the pressure in water the supply hose by triggering the
spray pistol.
4. Dismount the backflow preventer. Water has to come out of the
drain opening (c) (max. 100ml) to ensure separation of the potable
water.
5. If this is not the case, try cleaning the BA valve or contact your
Nilfisk-ALTO representative.
This high pressure washer/cleaner is only allowed to be con-
nected with the drinking water mains, when an appropriate
backflow preventer has been installed, Type BA according to
EN 60335-2-79.
The BA valve can be ordered under number:
BA valve including GARDENA couplings: 106411177
BA valve including NITO couplings: 106411178
BA valve including GEKA couplings: 106411179
BA valve without couplings: 106411184
The couplings can be ordered under number:
3/4” GARDENA (a): 1608629
3/4” GARDENA (b): 32541
3/4” NITO (a): 1602945
3/4” NITO (b): 1600659
1/2” NITO (b): 1604669
3/4” GEKA (a): 1718
3/4” GEKA (b): 1311
CAUTION
The backflow preventer can be mounted either vertically or hori-
zontally, and the drain opening (c) must be mounted pointing
downwards.
Water flowing from the drain opening (c) must be able to flow
freely.
If there is a risk of running sands in the inlet water (i.e. from your
own well), an additional filter should be mounted between the
water tap and backflow preventer.
The length of the hose between the backflow preventer and the
high pressure washer must be at least 12 metres (min diameter
3/4 inch) to absorb possible pressure peaks.
As soon as water has flown through the BA valve, this water is
not considered to be drinking water any more.
Protect the backflow preventer to any exposure to frost.
Keep the backflow preventer clean, and free of dirt.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk-ALTO Poseidon 6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk-ALTO Poseidon 6 in the language / languages: English as an attachment in your email.

The manual is 2,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nilfisk-ALTO Poseidon 6

Nilfisk-ALTO Poseidon 6 User Manual - German - 35 pages

Nilfisk-ALTO Poseidon 6 User Manual - Dutch - 34 pages

Nilfisk-ALTO Poseidon 6 User Manual - French - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info