493197
9
Zoom out
Zoom in
Previous page
1/17
Next page
9
english
1)
Accessories / model variants
NEPTUNE E
0
I
M
4.2 Switching on the
cleaner
1. Turn the main switch to posi-
tion
.
Control electronics accomplishes
a self check.
The Display shows for approx. 1
second „---“.
The motor starts.
is ON.
Cold water operation:
2. Turn temperture selector
switch (A) fully anticlockwise.
3. Turn the main switch (B) to
position .
Hot water operation:
2. Turn temperature selector
switch (A) to desired water
temperature.
The indication lamp
blinks during water is heated.
If water has reached the
preselected temperature, the
indication lamp lights.
3. Turn the main switch (B) to
position .
4. Unlock the spray gun and
squeeze trigger.
5. Lock the spray gun even dur-
ing short working pauses.
The cleaner switches off automati-
cally twenty seconds after the spray
gun has been closed. To start the
cleaner again, squeeze the trigger
and the machine will start automati-
cally.
4.3 Using cleaning agents
1. Select desired detergent (A)
or (B) and amount by turning
the knob to desired percent-
age.
2. Spray the object to be
cleaned.
3. Allow the cleaning agent to
work, depending on the de-
gree of soiling. Then rinse off
with high pressure.
5%
ca. ca.
3%
5%
3%
1%1%
NOTE!
Never allow clean-
ing agent to dry on
the surface to be
cleaned. The sur-
face may be dam-
aged.
The percentage shown in the illus-
tration are only approximate data.
For special applications such as dis-
infection, the exact detergent con-
centration has to be determined by
using a graduated measuring con-
tainer. For water outlet volume of
the machine see chapter 9.3 techni-
cal data.
Automatic temperature control
The electronically controlled mix-
ing valve regulates the preselected
work temperature, while sufficiently
hot water is in the boiler. If the water
temperature in the boiler drops un-
der the preselected work tempera-
ture, the indicator lamp
goes
out.
1. Wait until the boiler has heated
the water to preselected tem-
perature (the indicator lamp
blinks during heating-up).
or:
2. Operate the machine with lower
than preselected working tem-
perature.
During continuous operation the
work temperature oscillates itself on
the following values:
NEPTUNE
Working
temperature
E 12 34°C
E 24 46°C
The specified values refer to a water
inlet temperature of 12°C. If warmer
water is supplied (permissible up
to max. 70°C) higher values are
reached.
A
B
60
60
3
0
1
0
0
2
3
5
2
A
B
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk-ALTO Neptune E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk-ALTO Neptune E in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nilfisk-ALTO Neptune E

Nilfisk-ALTO Neptune E User Manual - German - 17 pages

Nilfisk-ALTO Neptune E User Manual - Dutch - 17 pages

Nilfisk-ALTO Neptune E User Manual - French - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info