Manual Nilfisk-ALTO NEPTUNE 2 (page 7 of 512) (All languages)

608955

Zoom out

Zoom in

1/512

Options / model variants

Original instruction

NEPTUNE 1, NEPTUNE 2

NEPTUNE 2 Special

Electrical equipment

CAUTION!

Never spray electrical equip-

ment with water: danger for per-

sons, risk of short-circuiting.

Switching on the cleaner may

cause voltage ﬂ uctuations.

Voltage fluctuations should not

occur if the impedance at the

transfer point is less than 0.15

If in doubt ask your local elec-

tricity supplier.

Maintenance and repair

CAUTION!

Always remove the plug from the

mains plug socket before clean-

ing or carrying out maintenance

work on the cleaner.

Carry out only the maintenance

operations described in the op-

erating instructions. Use only

original Nilfisk-ALTO spare

parts.

Do not make any technical mod-

ifications to the high-pressure

cleaner.

Ensure that the machine is reg-

ularly serviced by Authorised

Nilfisk-ALTO dealers in accord-

ance with the maintenace plan.

Failure to do so will invalidate

the warranty.

CAUTION!

High-pressure hoses, fittings

and couplings are important for

the safety of the cleaner. Use

only high-pressure parts ap-

proved by the manufacturer!

The mains power lead must not

differ from the version specified

by the manufacturer and may

only be changed by an electri-

cian.

Please contact the Nilfisk-ALTO

service department or an au-

thorised specialist work-shop for

all other maintenance or repair

work!

Testing

The cleaner conforms to the

German „Guidelines for Liq-

uid Spray Jet Devices“. The

high-pressure cleaner must be

subjected to a safety examina-

tion in accordance with the „Ac-

cident Prevention Regulations

for Working with Liquid Spray

Jet Devices (BGV D15)“ as re-

quired, but at least every 12

months, by an authorised in-

spector.

After all repairs or modifica-

tions to electrical equipment,

the protective conductor resist-

ance, the insulation resistance

and the leakage current must

be measured. Furthermore, a

visual inspection of the mains

power lead, a voltage and cur-

rent measurement and a func-

tion test must be carried out.

Our after-sales service techni-

cians are at your disposal as au-

thorised inspectors.

The complete „Accident Preven-

tion Regulations for Working

with Liquid Spray Jet Devices“

are available from the Carl Hey-

manns Verlag KG, Luxemburger

Strasse 449, 50939 Cologne or

from the appropriate associa-

tion of employers’ liability insur-

ances.

The pressure-bearing parts of

this high-pressure cleaner have

been manufactured in accord-

ance with § 9 of the German

Pressure Vessels Ordinance

and successfully subjected to a

pressure test.

Safety devices

Unacceptably high pressure is

fed back without residual pres-

sure via a bypass line into the

intake line of the pump when the

safety device is tripped.

If the conveying capacity falls

below a fixed value, the built-

in flow monitor automatically

switches off the oil burner. The

oil burner is set to continuous

ignition. As an additional protec-

tion mechanism, a thermo-sen-

sor is integrated in the chimney

of the heat exchanger. As such,

the appliance cannot overheat.

The safety devices are factory

set and leaded, and must not be

adjusted.

Warning

• Inhalation of aerosols can

be hazardous to health.

• Where applicable use a de-

vice in order to avoid or re-

duce aerosols production,

e.g., a shield covering the

nozzle.

• For protection against aero-

sols use a respiratory mask

of class FFP 2 or higher.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk-ALTO NEPTUNE 2 in the language / languages: All languages as an attachment in your email.

The manual is 55,18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nilfisk-ALTO NEPTUNE 2

Nilfisk-ALTO NEPTUNE 2 User Manual - Dutch - 22 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nilfisk-ALTO NEPTUNE 2 Manual

Product: