608945
10
Zoom out
Zoom in
Previous page
1/112
Next page
*)
Optional accessories / Option depending on model
Original instruction
10
Operating instructions
Troubleshooting MC 3C-MC 4M
Fault Cause Remedy
Pressure
uctuations
Air in suction hose. Fill hose with water and connect again
Not enough water supply Stop! Until appropriate water mains or hose reflect
pump Qmax
Water filter is clogged up Rinse the water filter
High pressure nozzle blocked/worn Clean or replace the nozzle with same size
Suction height exceeded Stop! until max suction height is present as specified
Foam
Sprayer
not produc-
ing foam
Detergent used is non-foaming Use only detergents with foaming agent.
Nozzle on suction hose is clogged up
or filled with dried out soap
Rinse detergent limiter / flush with tempered clean
water.
Foam sponge in foam Sprayer is
clogged up.
1 Rinse/soak foam Sprayer in tempered water for 8
hours or more
2 Or dismount front of foam Sprayer and exchange/
rinse the SS foam sponge with a new
Detergent tank empty Top up detergent tank
Motor does
not start
or bozzes
when
switched
on
Power cable broken Contact professional electrician for replacement of
power cable
Plug is not inserted in mains Insert plug
Mains fuse is blown Reset power mains
Plug has a loose connection to cable Repair/reassemble plug on cable - skilled electrician
The pump is blocked or frozen Stop! Unfreeze pump or contact dealer service depart-
ment
The thermal protector is activated Stop! Cool off machine for at least 5 minutes
Maintenance plan
Weekly
First time after 50 operating
hours
Every 200 operating
hours
As required
Cleaning
water fi lter
A1.1 A1.1
Checking oil
level/tip up
B1.0/E1.2
Changing
pump oil
Contact dealer/service dpt. Contact dealer/service dpt.
Special operating instructions
Self-suction
0: Dismount HP hose from the machine.
1: Fill the suction hose with water and connect to High
Pressure Washer (Item no. 6400000)
2: Mount suction hose with a hose clamp on the pump
inlet.
3: Turn main switch to ¨I¨ for few seconds. Repeat
turning main switch on and off several times until water
comes out of pump.
4: Mount the HP hose, spray handle and lance.
5: Turn main switch to ¨I¨.
6: Unlock the spray handle and operate it several times
until water coming out without air.
Parts needed for suction Item number
1 x Hose Nozzle 20R 3/4¨ 61369
1 x Hose 3/4¨ Max length 5 mtr
1 x Hose Clamp 3/4¨
1 x Suction Filter with foot-valve 6400000
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk-ALTO MC 3C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk-ALTO MC 3C in the language / languages: All languages as an attachment in your email.

The manual is 4,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info