609109
47
Zoom out
Zoom in
Previous page
1/56
Next page
47Original Instructions
3.6 Starting up/running in (cf. Fig. 4)
Once the desired settings have been made the cover of the switchboard should be closed and
both locks activated.
Make sure the water supply has been connected.
Turn the main switch (1) to position I.
Turn the control switch (2), to position I and keep an eye on the control panel (3) to make sure
that water is drawn in and the relief valve closed.
(Are there any red indicator lamps flashing on the control panel? cf. sect. "3.10 Trouble-shoot-
ing and corrections")
Press the starting switch (4) and 1 pump will then start running if the line pressure is on working
pressure or even higher. If the pressure is lower, 2 pumps will start and an additional pump will
start every other second until a working pressure has been achieved.
Fig. 4
The system is now in operation and water may be drawn off under high pressure at the individual
outlets. If consumption exceeds the capacity of the pumps connected a pump will immediately
be started up and an additional pump will follow every other second until capacity meets con-
sumption.
If consumption drops at the outlets so that the pump capacity becomes excessive, one pump
will stop every 15 seconds, until capacity meets consumption.
The controls determine a rotation between the individual C3K pumps so that all units -time-wise-
are subjected to the same load.
If consumption at the outlets is cut off completely all pumps will stop 1 every 15 seconds. The
system will then be on STAND BY with a working pressure on the line and one or more pumps
will start operating again as soon as the pressure in the line drops below 25 bar or if the outlets
are re-activated.
3
2
4
1
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk-ALTO DELTABOOSTER at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk-ALTO DELTABOOSTER in the language / languages: English as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nilfisk-ALTO DELTABOOSTER

Nilfisk-ALTO DELTABOOSTER Additional guide - English - 1 pages

Nilfisk-ALTO DELTABOOSTER Additional guide - German - 1 pages

Nilfisk-ALTO DELTABOOSTER User Manual - German - 56 pages

Nilfisk-ALTO DELTABOOSTER User Manual - Dutch - 62 pages

Nilfisk-ALTO DELTABOOSTER Additional guide - French - 1 pages

Nilfisk-ALTO DELTABOOSTER User Manual - French - 57 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info