Manual Nilfisk-ALTO ATTIX 125-01 (page 23 of 68) (English, German, French, Italian, Spanish)

493170

Zoom out

Zoom in

1/68

ATTIX 115-01 / ATTIX 125-01

11/2010

C365

At the end of a cleaning session

■ Turn the vacuum cleaner off with switch (1 - Fig. 4) and

disconnect the plug from the socket.

■ Wind the connection cable up and hang it in the relevant

compartment (Fig. 7).

■ Empty the container as described in the “Emptying the

container” paragraph.

■ Clean the vacuum cleaner as described in the paragraph

“Maintenance, cleaning and decontamination”.

■ Wash the container with clean water if aggressive

substances have been vacuumed.

■ Store the vacuum cleaner in a dry place, out of reach of

unauthorised persons.

Maintenance, cleaning and

decontamination

WARNING!

To guarantee the safety level of the vacuum cleaner,

only original spare parts supplied by the manufacturer

should be used.

WARNING!

The precautions described below must be taken

during all maintenance operations, including cleaning

and replacing the primary and absolute lters.

WARNING!

The maintenance, cleaning and decontamination

operations must only be performed with the vacuum

cleaner turned off and the plug disconnected from the

power socket.

It is absolutely forbidden to perform maintenance with

the plug connected to the socket.

Danger of electric shock!

■ If the user is performing the maintenance operations,

the vacuum cleaner must be disassembled, cleaned

and overhauled as far as reasonably possible without

hazards for the maintenance personnel or other people.

The suitable precautions include decontamination before

disassembling the vacuum cleaner, adequate ltered

ventilation of the exhaust air from the room in which it

is disassembled, cleaning the maintenance area and

suitable personal protection.

■ A check must be carried out by the manufacturer or the

personnel of the same at least once a year. For example:

check the air lters to nd out whether the air-tightness

of the vacuum cleaner has been impaired in any way and

make sure the electric system operates correctly.

Primary and absolute lter disassembly

and replacement

WARNING!

When the vacuum cleaner is used to vacuum

hazardous substances, the lters become

contaminated, therefore:

■ work with care and avoid spilling the vacuumed

dust and/or material;

■ place the disassembled and/or replaced lter in a

sealed plastic bag;

■ close the bag hermetically;

■ dispose of the lter in accordance with the laws

in force.

WARNING!

Filter replacement is a serious matter. The lter must

be replaced with one of identical characteristics,

ltering surface and category.

Otherwise the vacuum cleaner will not operate

correctly.

Primary lter replacement

Figure 8

Before proceeding with these operations, turn off the vacuum

cleaner and remove the plug from the power socket.

■ Release the stop (1), unscrew the lter shaker knob (2).

■ Release the closing band (3).

■ Lift the motor head (4).

■ Lift lter (5) and unscrew the lter clamp (6) on bearing

ring (7).

■ Unscrew cage (8) and overturn the lter, exposing

coupling clamp (9).

■ Release the clamps and detach the cage from the lter.

■ Dispose of the lter according to the laws in force.

■ Fit the new lter and secure it in the cage with special

clamps. Assemble the components in the reverse order

of disassembly.

WARNING!

Take care not to raise dust when this operation is

carried out. Wear a P3 mask and other protective

clothing plus protective gloves (DPI) suited to the

hazardous nature of the dust collected, refer to the

laws in force.

WARNING!

Reassemble with care to avoid trapping your hands

between the vacuum unit and the container. Use

gloves that provide protection against mechanical

risks (EN 388) with a level of protection CAT. II.

If necessary contact the manufacturer’s Service Centre.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk-ALTO ATTIX 125-01 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nilfisk-ALTO ATTIX 125-01

Nilfisk-ALTO ATTIX 125-01 User Manual - Dutch - 56 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nilfisk-ALTO ATTIX 125-01 Manual

Product: