Manual Nilfisk-ALTO ATTIX 115-01 (page 24 of 68) (English, German, French, Italian, Spanish)

493169

Zoom out

Zoom in

1/68

C365

11/2010

ATTIX 115-01 / ATTIX 125-01

Absolute lter assembly or replacement

WARNING!

Do not use the absolute lter again after having

removed it from the vacuum cleaner.

Figure 9

1. Vacuuming unit

2. Closing band

3. Filter shaker stop

4. Filter shaker knob

5. Washer

6. Ferrule

7. Absolute lter

8. Seal

9. Disc

10. Nut

WARNING!

Reassemble with care to avoid trapping your hands

between the vacuum unit and the container. Use

gloves that provide protection against mechanical

risks (EN 388) with a level of protection CAT. II.

Before proceeding with these operations, turn the vacuum

cleaner off and disconnect the plug from the power socket.

Assembly

1. Release the stop (3) and unscrew the lter shaker knob

(4), release the closing band (2) and remove the head

(1).

2. Unscrew the nut from the ferrule under the head (1),

insert the washer (5), screw the ferrule (6), insert the

lter (7), the gasket (8) and the disc (9), screw the nut

(10), t the head back in position and x with the closing

band (2), screw the knob (4) and lock it with the stop (3).

Replacement

1. Proceed as indicated in step 1 of the assembling

procedure.

2. Unscrew the nut (10), remove the disc (9) and the gasket

(8).

3. Replace the lter (7) and proceed in the reverse order to

reassemble the head.

To dispose of the lter put it in a sealed plastic bag, close it

hermetically and dispose of it in accordance with the laws in

force.

Tightness inspection

Hoses check

Make sure the connecting hoses (Fig. 10) are in a good

condition and correctly xed.

If the hoses are damaged, broken or badly connected to the

unions, they must be replaced.

When sticky materials are treated, check for possible clogging

along the hose, in the inlet and on the bafe plate inside the

ltering chamber.

Scrape inlet (2, Fig. 10) from the outside and remove the

deposited waste as indicated in the gure.

Filtering chamber tightness check

If gasket (1, Fig. 11) between container (4) and lter chamber

(3) fails to guarantee a good seal:

■ Loosen the four screws (2) that lock the ltering chamber

(3) against the vacuum cleaner structure.

■ Allow the ltering chamber (3) to lower down and tighten

the screws (2) once it has reached the tightness position.

If an optimal seal cannot be obtained and the gasket is torn or

cracked, etc. it must be replaced.

Disposing of the vacuum cleaner

Figure 12

Dispose of the vacuum cleaner in compliance with the laws in

force.

■ Proper disposal (electric and electronic waste).

(Applicable in the European Union and in countries

providing a separate collection system)

The above symbol (Fig. 12), which is present on the product

or in its documentation, indicates that the product cannot be

disposed of together with other domestic waste at the end of

its life cycle.

To prevent damage to the environment or health caused by

improper waste disposal, please separate this product from

other waste and recycle it responsibly in order to support the

sustainable reutilisation of material resources.

This product can not be disposed of together with other

commercial waste.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk-ALTO ATTIX 115-01 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nilfisk-ALTO ATTIX 115-01

Nilfisk-ALTO ATTIX 115-01 User Manual - Dutch - 56 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nilfisk-ALTO ATTIX 115-01 Manual

Product: