570913
5
Zoom out
Zoom in
Previous page
1/148
Next page
iii
Use an appropriate power supply
Use an AC power supply of 50/60Hz and a voltage of from 100V–240V. Use a power cord rated for the appropriate voltage.
At voltages of over AC 125V:
Use a power cord that complies with the safety standards of the country in which it is used, that has a plug rated for
AC 250V, 15A (NEMA 6P-15) and insulation of SVT type or better, and that is more than AWG18 in thickness.
At voltages of AC 125V or less:
Use a power cord that complies with the safety standards of the country in which it is used, that has a plug rated for
AC 125V, 10A and insulation of SVT type or better, and that is more than AWG18 in thickness.
Observe appropriate precautions when handling the power cable
Do not damage or modify the power cable. Fire or electric shock could result if the cable is placed under heavy
objects, exposed to heat or flame, or forcibly tugged or bent.
In the event that the insulation is damaged and the wires become exposed, contact your retailer or Nikon service
office for information on repair or replacement. Continued use could result in fire or electric shock.
• Do not handle the plug when your hands are wet. Doing so could cause electric shock.
Should you notice dust on or near the metal parts of the plug, remove it with a dry cloth. Continued use could
result in fire or electric shock.
CAUTIONS
Do not place heavy objects on the equipment
Do not place heavy objects on the equipment, as either the objects or the equipment could overbalance or fall, causing injury.
Save where indicated otherwise, do not put your fingers into the equipment
Failure to observe this precaution could result in injury.
Unplug the equipment when not in use
For your safety, turn off and unplug the scanner when you do not intend to use it for an extended period. Failure to
observe this precaution could result in fire.
Unplug the equipment before cleaning
For your safety, turn off and unplug the scanner when cleaning the equipment.
Place on a stable surface
Do not use the equipment on an unstable surface or on a surface that is not level. The equipment could fall,
resulting in injury or in damage to the scanner.
The scanner contains glass parts. Caution is advised in the event of breakage to prevent injury from broken glass.
Observe appropriate precautions when handling the power cable
Do not place the power cable in the vicinity of a stove or heater, as this could melt the insulation, resulting in fire
or electric shock.
Unplug the cable by the plug, never by pulling on the cord itself. Failure to observe this precaution could damage
the cord, resulting in fire or electric shock.
Do not plug the power cable into an extension cord or multi-outlet adapter, as this could cause fire or malfunction.
Ground the equipment
The outlet into which the power cable is plugged must be grounded. Failure to ground the power supply could
result in electric shock.
Do not ground the outlet to a gas or water pipe or a dedicated telephone system earth connector. Failure to
observe this precaution could result in fire or electric shock.
Do not handle the equipment when your hands are wet
Failure to observe this precaution could result in electric shock.
Keep equipment out of reach of children
Failure to observe this precaution could result in injury.
Install the scanner only as directed in this manual
Failure to observe this precaution could block the scanner’s vents and cause the power source to overheat, possibly resulting in fire.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nikon Super COOLSCAN LS-8000 ED at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nikon Super COOLSCAN LS-8000 ED in the language / languages: English as an attachment in your email.

The manual is 6,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nikon Super COOLSCAN LS-8000 ED

Nikon Super COOLSCAN LS-8000 ED User Manual - German - 130 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info