493198

Nikon SUPER COOLSCAN LS-5000 ED Manual

38
Zoom out
Zoom in
Previous page
1/160
Next page
29
Caring for Film
Keep fi lm free of dust. If necessary, remove dust from the fi lm with a blower before scanning. Dust on
the fi lm could damage the media or affect the quality of the scanned image (
5).
Inserting Film in the SA-21
• Release the fi lm when the feed mechanism activates. Do not pull or push the fi lm or otherwise inter-
fere with the feed mechanism.
• For information on what to do if fi lm jams in the adapter, see “Film Feed Errors (SA-21)” ( 60).
The SA-21 Lock Mechanism
The SA-21 is equipped with a lock mechanism that prevents the adapter from being removed while fi lm
is in place. Before removing the SA-21 from the scanner, be sure to eject the fi lm using the eject button
in the Nikon Scan scan window (
38). Attempting to remove the SA-21 without fi rst ejecting the fi lm
could interfere with the connection between the adapter and the scanner. If an attempt has been made
to remove the SA-21 without ejecting the fi lm, push the adapter back into the scanner to re-establish the
connection. Attempting to remove the adapter by force could damage the adapter or scanner.
Film That Can Not Be Used
Film can not be scanned in the SA-21 if:
• It is less than two or more than six frames long
• It has excessive curl
• Perforations are torn or missing
• Tape is applied to either end
• The ends are cut on an angle or torn
• The ends are folded
• The end perforations cut or torn
• There are holes between perforations
The MA-21 can be used to scan slides with mounts 1.0–3.2 mm thick and 49–50.8 mm wide. Other
slides can not be scanned.
“Preview/Thumbnail When Film Is Inserted”
If Thumbnail when fi lm is inserted (SA-21 only) or Preview when fi lm is inserted is selected in the
“Preferences” dialog (
41), choose a fi lm type and color model ( 31) before inserting fi lm.
“Film Base”/”Emulsion Surface”
When fi lm is examined under bright light, the image on the emulsion surface will be in slight relief, with
bumps and hollows where the image has been developed. The opposite surface (the fi lm base) will be
refl ective and smooth. Insert fi lm base up.
… 38 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nikon SUPER COOLSCAN LS-5000 ED at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nikon SUPER COOLSCAN LS-5000 ED in the language / languages: English, French as an attachment in your email.

The manual is 12,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nikon SUPER COOLSCAN LS-5000 ED

Nikon SUPER COOLSCAN LS-5000 ED User Manual - German, Dutch, Italian - 239 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info