493198
14
Zoom out
Zoom in
Previous page
1/160
Next page
5
Precautions for Use
Precautions for Use
Observe the following precautions to ensure that the scanner always produces the best pos-
sible results.
Check the status LED
Do not turn the scanner off or insert or remove fi lm or adapters while the status LED is blinking.
Do not use other USB devices or turn them on or off while the status LED is blinking.
Do not connect or disconnect USB or IEEE 1394 (Firewire) cables while the status LED is blinking.
Do not operate camera control software for digital cameras connected via USB while the status LED is
blinking.
When the scanner is not in use
•To prevent accumulation of dirt and dust when the device is not in use, turn the scanner off and insert
one of the supplied adapters in the adapter slot.
Remove optional holders from the adapter slot when not in use.
Connecting the scanner
Connect the scanner directly to the computer. The scanner may not function as expected when con-
nected to a USB hub or keyboard.
The scanner may not function as expected when used together with other USB devices. Should the
scanner not function as expected, use the scanner with all other USB devices disconnected.
Do not connect two or more scanners to the computer simultaneously.
Protecting fi lm
Before inserting fi lm, remove dirt and dust with a blower. This will not only keep the fi lm free of
scratches but will also help prevent scanning errors and malfunctions.
Remove fi ngerprints with a soft, dry cloth, being careful not to scratch the fi lm.
Remove fi lm from adapters or holders after scanning. Storing fi lm in an adapter or holder could dam-
age the fi lm.
The fi lm base and emulsion will deteriorate if exposed to high temperatures or humidity. Be sure tem-
perature and humidity are within the limits given below.
Sudden changes in temperature and humidity, even when within the limits stated below, can cause
condensation on the fi lm. Check before use to ensure that no condensation is present. If condensa-
tion has occurred, leave the fi lm out until it dries. Condensation can damage the fi lm during inser-
tion.
The operating environment for the scanner is as follows:
Temperature: +10 – +35 °C (+50 – +95 °F)
Humidity: 20 – 60%
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nikon SUPER COOLSCAN LS-5000 ED at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nikon SUPER COOLSCAN LS-5000 ED in the language / languages: English, French as an attachment in your email.

The manual is 12,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nikon SUPER COOLSCAN LS-5000 ED

Nikon SUPER COOLSCAN LS-5000 ED User Manual - German, Dutch, Italian - 239 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info