571000
112
Zoom out
Zoom in
Previous page
1/134
Next page
112
2
Procedures for close-up flash operation (using cords)
1
Turn on the camera and SU-800.
After turning on the camera, press the [ON/OFF]
button on the SU-800 to turn on the SU-800 and
SB-R200.
The red ready-lights on the SU-800 and SB-R200
come on when fully recycled.
Make sure that Close-up mode and Using cords
indicators appear on the LCD panel.
2
Setting the flash mode on the SU-800
Press the [MODE] button on the SU-800 to set the
flash mode to TTL BL, TTL or M.
3
Activating or canceling the SB-R200’s flash firing
Press the [A B] select button to set the remote
flash units in Group A or B to fire or to cancel.
A remote flash unit on the left as viewed from the
SU-800’s LCD panel is assigned to Group A, and a
flash unit on the right is assigned to Group B.
A flash canceled group indicator disappears.
You cannot cancel flash firing for both Groups A and B.
4
Setting the flash output level compensation (in TTL
BL or TTL mode)
Press the [SEL](FUNC.), or [W] or [X] button to
display the flash output level compensation value
(blinking). Press the [W] or [X] button to increase
or decrease the compensation value. Press the
[SEL](FUNC.) button once again and the value will
stop blinking. The last value to blink is the one that
has been set automatically.
The same value is set for both groups A and B.
Flash output level compensation values can be set in
1/3 step increments or decrements from +3.0 to -3.0 EV.
The values are displayed in decimal format, like 0.3 for
1/3, and 0.7 for 2/3.
Pressing the [W] or [X] button continuously increases
or decreases the value quickly.
The compensation value blinks during adjustment and
stops after blinking six times unless an adjustment is
made. The last value to blink is the one that has been
set automatically.
If the flash output level compensation value is set 0.0,
the display goes off.
Being able to set flash output level compensation is
dependant on camera in use.
112


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nikon SU-800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nikon SU-800 in the language / languages: English as an attachment in your email.

The manual is 3,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nikon SU-800

Nikon SU-800 User Manual - German - 136 pages

Nikon SU-800 User Manual - Dutch - 136 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info