570936
44
Zoom out
Zoom in
Previous page
1/75
Next page
8786
Chapter
3
Manual Flash i Mode
Fine light-output adjustment: F5, F90X/N90s, F90-
Series/N90 and F70-Series/N70 with AF Nikkor lens
(including the latest D-Type) or Nikkor lens having
a built-in CPU
Additionally, you can manip-
ulate light output in finer
increments of ±1/3, as long
as light output is set
between ' and ;.
Press button and
confirm L appears in the
SB-26s LCD panel. By
pressing ˛ button, you
can increase the light amount by +1/3 (blinking +0.3
below the L mark), by +2/3 (blinking +0.7), or by +1
(blinking 0.0).
To decrease, use Ç in the same manner; blinking
numbers change from _0.3 (by -1/3) to _0.7 (by -2/3) to
0.0 (by -1).
*At ', you cannot increase the light amount.
4
Press ı button to choose desired light output.
You can choose an amount ranging from full power (1/1) to
one sixty-fourth (1/64). LCD indications change as: - h -
' - " - j - k - l - ;-.
With the F5, F90X/N90s, F90-Series/N90 and F70-
Series/N70, indication 1, and then 2 will appear after ;.
At the same time, F appears next to D. This applies exclu-
sively to FP High-Speed Sync Flash and is discussed in the
following pages (see pages 98 to 103).
Set Up and Practice
1
Choose i position (flash mode selector). Confirm D
appears in the LCD panel.
2
Choose W position (flash sync mode selector*).
* q position is used for Rear-Curtain Sync Flash, and only with the F5,
F90X/N90s, F90-Series/N90, F70-Series/N70, F4-Series, F-801/N8008, and
F-801s/N8008s. For details, see page105.
3
Set ISO film speed and the built-in zoom head position.
For instructions, see Setting ISO Film Speed (Manual
Adjustment), pages 27 to 28, and Setting Zoom-Head
Position (Manual Adjustment), pages 29 to 30.
1 Flash mode selector
at Manual Flash
2 Flash sync mode
selector at NORMAL
3 ISO film
speed in
use and
zoom-head
position
6 Aperture
value
4 Flash out-
put level
Automatic ISO film speed/zoom-head position
adjustment: F5, F90X/N90s, F90-Series/N90,
F70-Series/N70, F4-Series, F-801/ N8008, or F-801s/
N8008s used with an AF Nikkor lens (including the lat-
est D-Type) or Nikkor lens having a built-in CPU
The film speed and zoom-head position in use are
automatically set and indicated in the SB-26s LCD
panel.
For other lenses, set manually according to the
shooting situation. See Setting ISO Film Speed
(Manual Adjustment), pages 27 to 28, and Setting
Zoom-Head Position (Manual Adjustment), pages 29
to 30.
SB-26 (E) 03.1.14 7:16 PM Page 86
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nikon SB-26 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nikon SB-26 in the language / languages: English as an attachment in your email.

The manual is 4,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nikon SB-26

Nikon SB-26 User Manual - German - 75 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info