570936
33
Zoom out
Zoom in
Previous page
1/75
Next page
6564
Chapter
3
TTL Auto Flash H Mode: For F-501/N2020 and F-301/N2000 Users
Choosing A Flash Method
The SB-26 lets you choose between Programmed TTL Auto
Flash or Standard TTL Flash in TTL Auto flash mode.
Use the charts at right to confirm available flash/exposure
mode combinations.
Programmed TTL Auto Flash
By setting the cameras exposure mode to a programmed
auto setting (either PDUAL, P or PHI), you can choose
Programmed TTL Auto Flash.
In Programmed TTL Auto Flash, the camera automatically
selects a shutter speed of 1/125 sec. and a controlled aper-
ture that corresponds to the ISO speed of the film in use
(see chart on page 68).
Flash output is regulated by the Speedlight to ensure a
correct subject exposure. This enables you to concentrate
on picture composition without worrying about exposure
settings (including aperture).
You can also perform Standard TTL Flash with the cam-
era set at aperture-priority auto (A) or manual exposure
mode. In Standard TTL Flash, the Speedlight controls the
flash output level to correctly expose the subject. Shutter-
speed and/or aperture setting(s) can be selected by the
user.
1) Suitable lenses and use depend on the camera; see instruction manual for
information.
2) Except AF lenses for F3AF cameras.
For Programmed TTL Auto Flash, use only AI-S lenses, which include AF
Nikkor, Nikkor lenses with a built-in CPU and Series E lenses.
TTL Auto flash mode H with F-501/N2020 and
F-301/N2000
Lens in Use
1)
AI-S type
lenses
(including
AF Nikkor
and AI-P)
2)
Camera’s
Exposure Mode
Programmed auto
(P
DUAL, P or PHI
)
Aperture-priority
auto (A)
Manual (M)
SB-26 Flash
Programmed TTL Auto Flash
Standard TTL Flash
10
Confirm ready-light has come on and subject is in
focus.
Confirm ready-light is on in the camera viewfinder g or on
the SB-26 Â.
Check whether subject is in focus by using the in-focus
indicator ! in the cameras viewfinder.
Firing Flash
11
Fully depress shutter release button to fire flash.
12
Recheck ready-light to see if it is blinking.
If ready-light blinks for a few seconds after shooting, the
flash has fired at its maximum output but the light may have
been insufficient.
Reconfirm shooting distance and, if necessary, move closer
to subject or select a wider aperture (in aperture-priority
auto or manual exposure mode) to compensate underexpo-
sure.
TTL Auto Flash H Mode: For F50-Series/N50 and F-401x/N5005 Users
SB-26 (E) 03.1.14 7:16 PM Page 64
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nikon SB-26 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nikon SB-26 in the language / languages: English as an attachment in your email.

The manual is 4,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nikon SB-26

Nikon SB-26 User Manual - German - 75 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info