570936
20
Zoom out
Zoom in
Previous page
1/75
Next page
3938
Confirming Settings
9
Look into camera viewfinder, compose and lightly
press the shutter release button.
Use AE-L (Auto Exposure Lock) on the camera to capture
exact exposure information for your picture composition
(except when in manual exposure mode).
Confirm controlled aperture and shutter speed. These also
appear in the cameras LCD panel.
The aperture in use (shown in the viewfinder) and shooting
distance indicator bars / appear in the SB-26s LCD
panel. Over-/Underexposure warning (background
exposure)
For overexposure alert, HI or a + (positive) value
appears in the cameras viewfinder and LCD panel.
For underexposure, electronic analog displays (in
viewfinder and LCD panel) show Lo or a “– (negative)
value.
Chapter
3
TTL Auto Flash H Mode: For F5, F90X/N90s, F90-Series/N90 and F70-Series/N70 Users
If Wide-Area focus is set on the camera, it automati-
cally switches over to Spot Area focus when the
SB-26 is turned on. In this case, blinks in the LCD
panel, and appears inside the viewfinder.
Setting Up Your Camera
6
Select one of the following exposure modes:
a. Programmed auto (P or Ps)
b. Shutter-priority auto (S)
c. Aperture-priority auto (A)
d. Manual exposure mode (M)
7
Select a metering system:
a. Matrix metering system
b. Center-Weighted metering system
c. Spot metering system
8
Perform other settings:
a. For programmed auto, set lens to minimum aperture
(highest f-number).
b. For shutter-priority auto, set lens to minimum aper-
ture (highest f-number), then set desired shutter
speed*.
c. For aperture-priority auto, set desired aperture.
d. For manual exposure mode, set desired shutter
speed* and aperture.
* Camera automatically shifts to the fastest synchronization speed if you choose
a speed that is not within the synchronization range.
Selecting an exposure-metering system on the F5, F90X/
N90s, F90-Series/N90 and F70-Series/N70 camera
For 3D Multi-Sensor Balanced or Multi-Sensor Balanced
Fill-Flash, choose a meter to measure background expo-
sure that most effectively meets the photo requirements
you with to achieve. (With F5, Standard TTL Flash will
always performs when Spot Metering is selected.)
Quick reference on the relationship between usable
apertures and flash shooting distance
Use the table on page 146 in this instruction manual.
SB-26 (E) 03.1.14 7:16 PM Page 38
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nikon SB-26 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nikon SB-26 in the language / languages: English as an attachment in your email.

The manual is 4,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nikon SB-26

Nikon SB-26 User Manual - German - 75 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info