570934
51
Zoom out
Zoom in
Previous page
1/73
Next page
101100
FP High-Speed Sync Flash
Chapter
4
6
Choose a shutter speed* from 1/250 to 1/4000 sec. on
the camera
* Although any shutter speed can be used, an uneven exposure may result with
speeds outside this range.
7
Set your desired aperture on the camera.
8
Focus on the subject.
Look into camera viewfinder and compose shot while lightly
pressing the shutter release button.
9
Confirm aperture and shutter speed in the cameras
viewfinder.
Check whether subject is focused by using the in-focus
indicator I.
10
Set the aperture value (from step 7) in the SB-25s
LCD panel.
See Setting Aperture Value (Manual Adjustment), pages
28 to 29.
The aperture value is automatically set and indicated in the
SB-25s LCD panel when the camera is used with an AF
Nikkor lens (including the latest D-Type) or a Nikkor lens
having a built-in CPU.
An indicator bar appears to show the appropriate
shooting distance.
5
Press button until appears in the LCD panel,
and confirm or appears in the light amount indicator
while LCD indication changes: - - - -
- - - - - -.
Next, choose either for FP1 flash operation or for FP2.
In a bright scene
After you have adjusted the camera/flash-to-subject
distance (with subject standing at the location repre-
sented by indication bar ), readjust indicator bar
(from step 11) to the left by one or two steps so the
bar indicates a position closer than the actual subject
location.
Experience indicates that a small amount of under-
exposure may result in a more pleasing photograph.
To readjust the indicator bar, perform one or a com-
bination of the following adjustments:
1) Pressing button to switch from FP1 (
with ) to FP2.
2) Moving further from the subject.
3) Choose a different number for the zoom-head
position (wider angle of coverage).
We recommend that you not manipulate shutter
speed and aperture on the camera.
Detaching the SB-25
When you take off the Speedlight from the F90-
Series/N90 to use it with another camera, be sure to can-
cel FP flash operation by pressing the button: con-
firm disappears from the LCD panel. If it is removed
with FP setting, blinks a warning. The SB-25 will not
function normally with the FP setting when mounted to
any model other than the F90-Series/N90.
Shifting to other mode
Shutter speed is automatically locked at 1/250 sec., if
you have set a shutter speed at 1/250 sec. or faster, then
you perform one of the following:
a. Switch exposure mode to programmed auto on the
camera, or
b. Change from FP High-Speed Sync to another flash
operation on the Speedlight.
SB-25_En 03.1.14 8:18 PM Page 100
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nikon SB-25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nikon SB-25 in the language / languages: English as an attachment in your email.

The manual is 4,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nikon SB-25

Nikon SB-25 User Manual - German - 73 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info