570934
45
Zoom out
Zoom in
Previous page
1/73
Next page
88
Manual Flash Mode
Chapter
3
89
7
If necessary, press or button to reset the indi-
cator bar so it points to the measurement scale
that matches or nearly equals the actual flash-to-subject
distance (can be read from lens barrel).
Manipulating indication bar causes the aperture value in the
LCD panel to change.
8
On the camera, reset the aperture value obtained in the
previous step (the aperture that corresponds to the
actual flash-to-subject distance).
You have now completed all necessary adjustments for
locating the subject within an appropriate shooting distance
range for the predetermined light output and aperture.
9
Look into camera viewfinder, compose and lightly
press the shutter release button to confirm that subject
is in focus.
Check that ready-light is on in the cameras viewfinder or
on the SB-25 .
10
Fully depress shutter release button to fire flash.
Synchronization in Continuous Shooting
The SB-25 is able to recycle fast enough to synchronize
with a motor-driven camera firing continuously at up to six
frames per sec. at 1/64 light output. This means you can
take up to 40 flash pictures in rapid succession. Batteries
must be fresh to achieve the rates indicated.
Caution
Let the flash unit rest at least 10 minutes after
continuous firing at a maximum number (see the
chart), to allow it to cool off. Overuse generates heat
that could shorten the Speedlights life.
Safety range in continuous firing
Flash mode Max. number
TTL Auto 15
Non-TTL Auto 15
15 at full (1/1) or 1/2 light output,
Manual Flash
40 at 1/4, 1/8, 1/16, 1/32
or 1/64 light output
Batteries
Optional
external pow-
er source
Light output
Number of
continuous flash
(frames)
Inside
SB-25
AA-type
alkaline-
manganese
(four sets)
AA-type
NiCd (four
sets)
SD-7
SD-8
SD-8
(when used
with NiCd bat-
teries)
More than 4
More than 8
More than 16
More than 30
More than 6
More than 10
More than 40
More than 40
More than 5
More than 10
More than 20
More than 40
More than 5
More than 10
More than 30
More than 40
Continuous firing in Manual Flash mode
6
Set the same aperture value in the SB-25s LCD panel.
For instruction, see Setting Aperture Values (Manual
Adjustment), pages 28 to 29.
An indicator bar appears to show appropriate shooting
distance for the selected aperture.
SB-25_En 03.1.14 8:18 PM Page 88
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nikon SB-25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nikon SB-25 in the language / languages: English as an attachment in your email.

The manual is 4,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nikon SB-25

Nikon SB-25 User Manual - German - 73 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info