570934
34
Zoom out
Zoom in
Previous page
1/73
Next page
66 67
1
Choose position (flash mode selector). Confirm
in the LCD panel.
2
Choose position* (flash sync mode selec-
tor).
* Since TTL Auto Flash operation can be performed regardless of the flash sync
mode selector setting, for simplicity, always leave the switch at this position.
3
Set ISO speed of film in use. Usable film speeds are
ISO 25 to ISO 1000.
For instruction, see Setting ISO Film Speed (Manual
Adjustment), pages 27 to 28.
4
Set the built-in zoom head position.
For instruction, see Setting Zoom-Head Position (Manual
Adjustment), pages 29 to 30.
Shooting indicator bars in the LCD panel move as the
figure input changes.
Setting Up Your Camera
5
Select one of the following exposure modes:
a. Programmed auto (either P
DUAL, P or PHI) to perform
Programmed TTL Auto Flash.
b. Aperture-priority auto (A) to perform Standard TTL
Flash.
c. Manual exposure mode to perform Standard TTL
Flash.
6
Perform other settings:
a. For programmed auto, set lens to minimum aperture
(highest f-number).
b. For aperture-priority auto, set desired aperture.
c. For manual exposure mode, set desired shutter
speed* and aperture.
* Camera automatically shifts to the fastest synchronization speed if you choose
a speed that is not within the synchronization range.
TTL Auto Flash Mode: For F-501/N2020 and F-301/N2000 Users
Chapter
3
Confirm Settings
7
Set aperture in the SB-25s LCD panel*.
For instruction, see Setting Aperture Value (Manual Adjustment), pages 28 to 29.
In programmed auto exposure mode, aperture is automatically controlled by the
camera. Choose a value, using Shutter speed/aperture settings in Programmed
TTL Auto Flash in the following page.
In aperture-priority auto or manual exposure mode, set the aperture value that you
have set on the camera (from step 6).
Once aperture is set, indicator bars show the shooting distance range.
* This operation is important for reading the appropriate shooting distance from the indicator bars (step 8);
setting a wrong aperture value on the SB-25 does not affect all TTL Auto Flash operations a shot will be
taken with the aperture set on the camera.
Quick reference on the relationship between
usable apertures and flash shooting distance
Use table on page 142 in this instruction manual.
8
Confirm shooting distance.
Check whether subject falls within the
range of the shooting distance indica-
tor bars in the SB-25s LCD
panel. If not, move closer to subject or
select a wider aperture (when aper-
ture-priority auto or manual exposure
mode), then repeat steps 7 and 8.
SB-25_En 03.1.14 8:18 PM Page 66
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nikon SB-25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nikon SB-25 in the language / languages: English as an attachment in your email.

The manual is 4,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nikon SB-25

Nikon SB-25 User Manual - German - 73 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info