604472
6
Zoom out
Zoom in
Previous page
1/33
Next page
10 11
En
Fr
Es
Pt
En
Fr
Es
Pt
5. Internal display
Distance
Unit of measure (m/yd.)
Target mark
Laser irradiation mark
Horizontal Distance display mode
Battery condition
First Target Priority mode
Distant Target Priority mode
: Aim at the target you want to measure. Position the target at the center of the reticle.
: Appears while the laser is being irradiated for a measurement.
Do not look towards the objective lens side while this mark is shown.
: "Failure to measure" or "Unable to measure"
* Because the internal display of this product is enlarged by the eyepiece, dust may sometimes be seen.
This will not, however, affect the measurement accuracy.
7. Measurement display mode
1. Turn on the power.
2. Press and hold the MODE button, then
immediately press the POWER ON/Measurement
button.
3. Release your finger from the POWER ON/
Measurement button within 2 seconds to switch
the Measurement display mode.
4. Repeat steps 2 and 3 to switch measurement
display mode in rotation.
* If the buttons are not pressed in the correct order,
switching will not take place.
1. Turn on the power.
2. Press and hold the MODE button, then press and hold the POWER ON/Measurement button.
Continue to press and hold both buttons (for more than 2 seconds) until Target Priority modes are switched.
3. Release both buttons after the mode has switched.
*
If the buttons are not pressed in the correct order, switching will not take place.
[First Target Priority mode/Distant Target Priority mode]
When measuring overlapping subjects, First Target Priority mode displays the distance of the closest subject and
Distant Target Priority mode displays that of the farthest subject.
First Target Priority mode
[
]
Distant Target Priority mode
[
]
6. Distance display units
Meter [ ]Yard
[ ]
Measurement results are displayed in yards/meters. (Factory default setting is yard.)
1. Turn on the power.
2. Press and hold the MODE button for more than two seconds. After the display unit has switched, release the button.
This Nikon Laser Rangefinder employs the First Target
Priority/Distant Target Priority switching system.
(Factory default setting is Distant Target Priority mode)
Horizontal Distance
Mode
Actual Distance
Mode
Horizontal
Distance
8. Target priority mode
Actual
Distance
6


Need help? Post your question in this forum.

Forumrules
1

Forum

nikon-prostaff-7i

Reset search

  • Why won’t my Nikon rangefinder range long distance? Submitted on 29-10-2021 at 23:49

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nikon PROSTAFF 7i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nikon PROSTAFF 7i in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 4,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nikon PROSTAFF 7i

Nikon PROSTAFF 7i User Manual - German, Dutch, Danish, Italian, Polish, Swedish, Norwegian, Finnish - 184 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info