604494

Nikon Prostaff 3 Manual

7
Zoom out
Zoom in
Previous page
1/33
Next page
12
En
Fr
Es
Pt
13
En
Fr
Es
Pt
Operational summary
Caution—use of controls or adjustments or
performance of procedures other than those
specified herein may result in hazardous radiation
exposure
1. Install a battery in the battery chamber. (See
"Changing Batteries")
2. Rubber eyepiece cup
Eyeglass wearers: Roll up the rubber eyepiece cup
and use.
Non-eyeglass wearers: No need to roll up the rubber
eyepiece cup for use.
3. Diopter adjustment
Adjust diopter to obtain a clear image in the LCD.
First, rotate the diopter adjustment ring
counterclockwise until it comes to a complete
stop. Next, turn on the power to activate the LCD
when you look through the PROSTAFF 3. Rotate the
diopter adjustment ring clockwise until the display
comes into focus.
If the diopter is not adjusted to correspond to your
eyesight, you may not be able to clearly focus your
subject.
4. Measuring
Note: Depressing and holding down the POWER
button causes all symbols to be displayed in
the LCD panel. After you remove your finger
from the POWER button, the last-used setting
is displayed. (If you briefly press the POWER
button then remove your finger, the LCD panel
may display the last-used setting without
displaying all of the symbols. This is not a
malfunction or other problem.)
Before measuring, be sure to confirm unit setting.
5. Selecting display unit (default setting is yards.)
1. Confirm the internal LCD panel is on.
2. Press and hold the MODE button (more than two
seconds.)
3. When display unit has switched, release the MODE
button.
4. Repeat steps 2 and 3 until your desired mode is
displayed.
5. When you have completed setting, results will
be converted and displayed in the your selected
measurement unit.
Meter [ ]Yard [ ]
6. Distance display
The PROSTAFF 3 features Distant Target Priority
System.
When obtaining different results from a single
measuring operation, the PROSTAFF 3 will display
the distance to the farthest target on the LCD panel.
ex.) When measuring a tree standing in front of a
house;
"128m" (distance to the house) will be displayed.
This mode has applications for hunting in heavy
wooded areas.
7. Low battery indication
Flashing
indicates that the battery power is
low and battery should be replaced. (See "Changing
Battery")
Tree Fence House
Distance to Target 115m 123m 128m
POWER
LCD is illuminated
Align the reticle
with the target
POWER
appears
Indication
remains
illuminated
for 8 sec.
8 seconds pass without operation ＊
Power off: LCD indications disappear
Measure again
Fail to measure
Cannot measure
Successfully
measured
For continuous
distance
measurement (up
to 20 seconds),
keep button
depressed.
or
☆
☆【Continuous measurement mode】
Depressing the POWER button allows you to perform
continuous measurement for 20 seconds.
Appears while performing measurements.
＊ Power turns off automatically 8 seconds after the last
operation.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nikon Prostaff 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nikon Prostaff 3 in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 7,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info