501564
35
Zoom out
Zoom in
Previous page
1/67
Next page
68
Check points
Auto Exposure Bracketing cannot be performed in a and Vari-Program.
Auto Exposure Bracketing and Multiple Exposure (page 69) cannot be set
simultaneously.
Auto Exposure Bracketing and Long Time exposure (page 62) cannot be set
simultaneously.
3
Auto Exposure Bracketing is completed and automatically
cancelled when the third shot is taken.
z and = in the LCD panel and = and the electronic analogue exposure display
in the viewfinder disappear when the bracketing is completed.
To cancel the bracketing, rotate the Command Dial while pressing the ¸ button
so z disappears from the LCD panel. Turning the power switch off does not
cancel bracketing.
Auto Exposure Bracketing—continued Multiple Exposure
ADVANCED OPERATION
Multiple Exposure consists of two or more exposures of one or more subjects
in the same frame.
Multiple Exposure can be set in P, S, A and M exposure modes.
1
Rotate the Command Dial while pressing the multiple
exposure ¸ button so Z appears in the LCD panel. The
display changes as follows:
2
Rotate the Command Dial while pressing the k button to
set the necessary Exposure Compensation.
Cancel
(no display)
Z appears in the LCD panel when the
Multiple Exposure is set.
Test shooting is recommended since the compensation actually required varies
depending on the shooting situation.
When the background is completely dark and subjects do not overlap, no
compensation is necessary for each shot.
In some cases, frames may shift slightly in multiple exposure. In particular, film
advance becomes unstable at the beginning and near the end of a film roll so
multiple exposure is not recommended.
69
Electronic analogue exposure display
(Example: bracketing value 1.0, in A mode)
First shot (correct EV)
Second shot
(under EV)
Third shot (over EV)
If the Exposure Compensation function (page 64) is also set, bracketing will be
combined with the Exposure Compensation values. It is useful to perform
Bracketing with a compensated value of over +2 EV or under –2 EV (maximum of
±5 EV).
If the end of the film roll is reached during bracketing, the remaining shots can be
taken after new film has been loaded. Also, if you turn the power switch off during
bracketing, the remaining shots can be taken after the power is turned back on.
F75 (En) 03.1.23 11:09 AM Page 68
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nikon F75 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nikon F75 in the language / languages: English as an attachment in your email.

The manual is 9,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nikon F75

Nikon F75 User Manual - German - 67 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info