501564
11
Zoom out
Zoom in
Previous page
1/67
Next page
3
PREPARATION
2120
Film cartridge can be loaded smoothly if inserted from the bottom.
Make sure to insert the film cartridge all the way in.
2
Pull film leader across to red index mark.
The film automatically advances to the final frame with blinking o, o–, o––, o–––
as indicated in the LCD panel, and film rewinds one frame at a time as photos are
taken. The LCD panel indicates number of exposures left on film.
When the film has completed set up, a shutter sound is let out but no picture has
been taken.
• When E appears in the LCD panel, or Err and E in the LCD panel and in the
viewfinder blink, film is not properly installed. Open the camera back again and
reload film by aligning the film leader to the red index mark. œ blinks in the
viewfinder when the film is not loaded.
Pictures taken on frames beyond the indicated number of the exposures for the
film roll may be discarded in the process of developing.
ç 2 : Warning indications in the viewfinder can be set not to appear (p. 74).
NOTE: Loading/removing film
Shutter curtains are very thin. Do not touch the shutter curtains
with your finger or the film leader.
Load Film
Turn the power switch on and load DX-coded film. With DX-coded film, film
speed will be set automatically (ISO 25-5000). When the camera back is
closed, the film automatically advances and the number of available
exposures is displayed in the LCD panel.
DX-coded film
With DX-coded film, film speed will be set
automatically between ISO 25 to ISO 5000.
Film speed is set to ISO 100 with non-DX-
coded film.
Check points
Avoid direct sunlight when changing film outdoors.
You can check the number of available exposures on the film roll and film speed
through the film confirmation window.
Infrared films cannot be used with this camera since an infrared sensor is used for
the detection of the film frame position.
DX-coded film
ISO
(film speed)
DX mark
1
Turn the power switch on, open the camera back by sliding
the camera back lock release lever and load film.
Make sure to align the film leader to the red index mark; if the film leader is not
properly aligned to the index mark (short of or beyond the mark), film may not be
loaded properly.
Hold the film cartridge and ensure film is properly positioned with no slack.
3
Gently close the camera back until the camera back snaps
closed.
F75 (En) 03.1.23 11:09 AM Page 20
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nikon F75 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nikon F75 in the language / languages: English as an attachment in your email.

The manual is 9,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nikon F75

Nikon F75 User Manual - German - 67 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info