570963
49
Zoom out
Zoom in
Previous page
1/69
Next page
9796
F
U
N
C
T
I
O
N
BUILT-IN FLASH OPERATION
1
Press the flash lock-release to
release and activate the built-in
flash.
If continuous shooting (Z or X) is set
on the camera, it automatically
switches over to single-frame shooting
(V) when the built-in flash pops up. In
this case, Z or X blinks in LCD
panel.
If Wide Area focus is set on the
camera, it automatically switches over
to Spot Area focus when the built-in
flash pops up. In this case, < blinks in
LCD panel, and e appears inside the
viewfinder.
2
Set metering system to Matrix (i) and set exposure mode as desired. Then set
flash sync mode as desired.(See page 68). In the example illustration, Red-Eye
Reduction mode is set.
3
Set shutter speed and aperture. (See table on page 99).
For Slow Sync
Set exposure mode to
Programmed Auto (A) or Aperture-
Priority Auto (D).
Slow Sync is automatically set with
Night Scene Program and Motion
Effect Program.
Use a tripod to prevent camera
shake.
For Rear-Curtain Sync
Since Rear-Curtain Sync is
especially effective at a slow shutter
speed, Slow Sync is automatically
set at the same time that Rear-
Curtain Sync is set in Programmed
or Aperture-Priority Auto exposure
mode.
When selecting a slower shutter
speed, use a tripod to prevent
camera shake.
4
Compose and lightly press shutter release button. Confirm that ready-light (red j)
lights up.
If electronic analog display is shown in Shutter-Priority, Aperture-Priority Auto or
Manual exposure mode, background may be underexposed. To obtain correct
exposure for background:
In Shutter-Priority Auto exposure mode: Set a slower shutter speed.
In Aperture-Priority Auto exposure mode: Set flash sync mode to Slow Sync to
extend the automatically controlled shutter speed range, or set a wider aperture.
In Manual exposure mode: Set a slower shutter speed and/or a wider aperture.
5
Make sure the subject is within the
flash shooting distance range (page
90), then fully depress shutter release
button to take a shot with flash.
After shooting, check ready-light again. If
it blinks for a few seconds after shooting,
the light might have been insufficient.
Confirm shooting distance and if
necessary, move closer to the subject or
select a wider aperture.
With Red-Eye Reduction
Before shutter release, the red-eye reduction lamp lights up for approx. one second to make
the subject’s eye pupils become smaller, thus reducing the appearance of red-eye.
F70D I/MêÊçsâ¸í˘ 03.1.16 5:33 PM Page 96
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nikon F70D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nikon F70D in the language / languages: English as an attachment in your email.

The manual is 3,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info