15454
136
Zoom out
Zoom in
Previous page
1/192
Next page
136
Shooting Menu [Imprinting Shooting Data]—continued
Notes on imprinting data
Darkness of imprinted data
Darkness of the imprinted data is automatically adjusted by the camera depending
upon the sensitivity of the loaded film. However, imprinted data may appear darker
or lighter depending on the type of film used even with the same film sensitivity
since data is imprinted from the reverse side of the film. So make trial shots to
check the darkness of the imprinted data and if it is not adequate, adjust the
darkness in Custom Setting “d8: Imprint density” (x 103).
Set the imprint density to +1 or +2 with a film such as Kodachrome 64,
Kodachrome 200 or Fujichrome Velvia, that has low sensitivity from the reverse
side.
Special purpose film
Data cannot be imprinted on low-sensitivity films such as infrared film or reprocopy
film.
Make sure to set the date/time before setting imprinted data (x 35).
Data imprint in multiple exposure
In multiple exposure mode (x 138), data is imprinted at first exposure.
Imprinted data may become difficult to read when many backgrounds or subjects
are exposed in multiple exposure.
Using in-frame imprint in combination with between-frame imprint
Some data cannot be imprinted when both in-frame and between-frame imprint
are selected. If you cannot select your desired data or imprint is not possible,
change the data imprint setting.
When in-frame imprint is selected beforehand:
When in-frame imprint is set to date, date and time, user index number, frame
count number or sequential number, the same data is imprinted between frames
and different data cannot be selected. However, “+Date” for date, “+Date and
time” for date and time and “+User Index No.” for user index number can be
set.
When between-frame imprint is selected beforehand:
When between-frame imprint is set to date, date and time, user index number,
frame count number or sequential number, the same data is imprinted in-frame
and different data cannot be selected.
When “fi= + metering system”, “fi= + focal length” or “fi= + time” is
selected for between-frame imprint, data cannot be imprinted in-frame.
P930_En 04.10.19 7:19 PM Page 136
136


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nikon F6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nikon F6 in the language / languages: English as an attachment in your email.

The manual is 5,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nikon F6

Nikon F6 User Manual - German - 192 pages

Nikon F6 User Manual - Dutch - 192 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info