Manual Nikon Coolshot (page 63 of 139) (All languages)

570991

Zoom out

Zoom in

1/139

124 125

Gebruiksaanwijzing

Voorzichtig: als u zich bij het bedienen of afstellen

van het apparaat niet houdt aan de instructies in

dit document, kan dit blootstelling aan

gevaarlijke straling tot gevolg hebben.

1. Plaats een batterij in het batterijvak. (Zie

'Batterij vervangen')

2. Aanpassing van de dioptrie

Pas de dioptrie aan om een scherp beeld te krijgen

op het LCD-venster.

Draai de dioptriering eerst helemaal naar links. Zet

daarna, terwijl u door de Nikon laserafstandsmeter

kijkt, het instrument aan om het LCD-venster te

activeren. Draai de dipoptriering naar rechts totdat

u het venster scherp ziet.

Als de dioptrie niet is afgesteld op uw

gezichtsvermogen, kan het lastig zijn om goed op

het doel te richten.

3. Meten

Controleer of de juiste meeteenheid is ingesteld

voordat u een meting uitvoert.

Measurement

1. Press the POWER button for power-on.

(Power turns off 8 seconds after the last

operation.)

Immediately after power-on.

(Initializing)

Stand-by. Target focusing.

2. Aim at the target

3. Press POWER button once to start

continuous measurement for 8 seconds.

(Single measurement mode is not

available with this laser rangefinder.)

Measuring.

4. For 8 seconds, the internal display shows “distance” and “fail to measure” indicator alternately.

(Laser irradiation mark is blinking.)

Failure to measure or

unable to measure distance.

Displays the measured

figure. (Target 1)

Displays the measured

figure. (Target 2)

5. After continuous measurement, the measured results are displayed for 8 seconds, then power

turns off.

If you press the POWER button during power-on (while the internal display is lit), another

8-second measurement starts.

Measurement

1. Press the POWER button for power-on.

(Power turns off 8 seconds after the last

operation.)

Immediately after power-on.

(Initializing)

Stand-by. Target focusing.

2. Aim at the target

3. Press POWER button once to start

continuous measurement for 8 seconds.

(Single measurement mode is not

available with this laser rangefinder.)

Measuring.

4. For 8 seconds, the internal display shows “distance” and “fail to measure” indicator alternately.

(Laser irradiation mark is blinking.)

Failure to measure or

unable to measure distance.

Displays the measured

figure. (Target 1)

Displays the measured

figure. (Target 2)

5. After continuous measurement, the measured results are displayed for 8 seconds, then power

turns off.

If you press the POWER button during power-on (while the internal display is lit), another

8-second measurement starts.

Measurement

1. Press the POWER button for power-on.

(Power turns off 8 seconds after the last

operation.)

Immediately after power-on.

(Initializing)

Stand-by. Target focusing.

2. Aim at the target

3. Press POWER button once to start

continuous measurement for 8 seconds.

(Single measurement mode is not

available with this laser rangefinder.)

Measuring.

4. For 8 seconds, the internal display shows “distance” and “fail to measure” indicator alternately.

(Laser irradiation mark is blinking.)

Failure to measure or

unable to measure distance.

Displays the measured

figure. (Target 1)

Displays the measured

figure. (Target 2)

5. After continuous measurement, the measured results are displayed for 8 seconds, then power

turns off.

If you press the POWER button during power-on (while the internal display is lit), another

8-second measurement starts.

Measurement

1. Press the POWER button for power-on.

(Power turns off 8 seconds after the last

operation.)

Immediately after power-on.

(Initializing)

Stand-by. Target focusing.

2. Aim at the target

3. Press POWER button once to start

continuous measurement for 8 seconds.

(Single measurement mode is not

available with this laser rangefinder.)

Measuring.

4. For 8 seconds, the internal display shows “distance” and “fail to measure” indicator alternately.

(Laser irradiation mark is blinking.)

Failure to measure or

unable to measure distance.

Displays the measured

figure. (Target 1)

Displays the measured

figure. (Target 2)

5. After continuous measurement, the measured results are displayed for 8 seconds, then power

turns off.

If you press the POWER button during power-on (while the internal display is lit), another

8-second measurement starts.

Measurement

1. Press the POWER button for power-on.

(Power turns off 8 seconds after the last

operation.)

Immediately after power-on.

(Initializing)

Stand-by. Target focusing.

2. Aim at the target

3. Press POWER button once to start

continuous measurement for 8 seconds.

(Single measurement mode is not

available with this laser rangefinder.)

Measuring.

4. For 8 seconds, the internal display shows “distance” and “fail to measure” indicator alternately.

(Laser irradiation mark is blinking.)

Failure to measure or

unable to measure distance.

Displays the measured

figure. (Target 1)

Displays the measured

figure. (Target 2)

5. After continuous measurement, the measured results are displayed for 8 seconds, then power

turns off.

If you press the POWER button during power-on (while the internal display is lit), another

8-second measurement starts.

Measurement

1. Press the POWER button for power-on.

(Power turns off 8 seconds after the last

operation.)

Immediately after power-on.

(Initializing)

Stand-by. Target focusing.

2. Aim at the target

3. Press POWER button once to start

continuous measurement for 8 seconds.

(Single measurement mode is not

available with this laser rangefinder.)

Measuring.

4. For 8 seconds, the internal display shows “distance” and “fail to measure” indicator alternately.

(Laser irradiation mark is blinking.)

Failure to measure or

unable to measure distance.

Displays the measured

figure. (Target 1)

Displays the measured

figure. (Target 2)

5. After continuous measurement, the measured results are displayed for 8 seconds, then power

turns off.

If you press the POWER button during power-on (while the internal display is lit), another

8-second measurement starts.

Measurement

1. Press the POWER button for power-on.

(Power turns off 8 seconds after the last

operation.)

Immediately after power-on.

(Initializing)

Stand-by. Target focusing.

2. Aim at the target

3. Press POWER button once to start

continuous measurement for 8 seconds.

(Single measurement mode is not

available with this laser rangefinder.)

Measuring.

4. For 8 seconds, the internal display shows “distance” and “fail to measure” indicator alternately.

(Laser irradiation mark is blinking.)

Failure to measure or

unable to measure distance.

Displays the measured

figure. (Target 1)

Displays the measured

figure. (Target 2)

5. After continuous measurement, the measured results are displayed for 8 seconds, then power

turns off.

If you press the POWER button during power-on (while the internal display is lit), another

8-second measurement starts.

1. Druk op de POWER-

knop om het instrument

aan te zetten.

2. Richt op het doel.

Onmiddellijk na

inschakeling.

Stand-by. Richten op het

doel.

3. Druk één keer op de POWER-knop om een continumeting van

8 seconden te starten. (Met deze laserafstandsmeter is een

enkelvoudige meting niet mogelijk.)

Meten.

4. Gedurende 8 seconden toont het interne LCD-venster afwisselend

het symbool voor 'afstand' of 'meting is mislukt'. (Het symbool 'laser

is actief' knippert.)

De meting is mislukt

of de afstand kan niet

worden gemeten.

Toont de gemeten

afstand. (Doel 1)

Toont de gemeten

afstand. (Doel 2)

Measurement

1. Press the POWER button for power-on.

(Power turns off 8 seconds after the last

operation.)

Immediately after power-on.

(Initializing)

Stand-by. Target focusing.

2. Aim at the target

3. Press POWER button once to start

continuous measurement for 8 seconds.

(Single measurement mode is not

available with this laser rangefinder.)

Measuring.

4. For 8 seconds, the internal display shows “distance” and “fail to measure” indicator alternately.

(Laser irradiation mark is blinking.)

Failure to measure or

unable to measure distance.

Displays the measured

figure. (Target 1)

Displays the measured

figure. (Target 2)

5. After continuous measurement, the measured results are displayed for 8 seconds, then power

turns off.

If you press the POWER button during power-on (while the internal display is lit), another

8-second measurement starts.

5. Na een continumeting wordt het gemeten resultaat gedurende

8 seconden getoond, daarna schakelt het instrument

automatisch uit. Als u op de POWER-knop drukt terwijl het

instrument is ingeschakeld (en het interne LCD-venster verlicht

is), wordt een volgende continumeting van 8 seconden gestart.

Als u bijvoorbeeld de afstand tot een vlag meet op een golfbaan,

dan zal er gemakkelijker een meting tot stand worden gebracht

als u de vlag scant tijdens het meten. Als er zich geen voorwerpen

bevinden tussen u en de vlag, dan is de kortste meting de afstand

tot de vlag.

4. De weergave-eenheid selecteren

(de standaardinstelling is yard)

1. Controleer of het LCD-venster is ingeschakeld.

2. Houd de MODE knop 2 seconden of langer.

3. Laat de MODE knop los als de andere eenheid wordt

weergegeven.

4. Als u overschakelt naar de andere weergave-eenheid,

worden de resultaten omgerekend en weergegeven

in de nieuwe eenheid.

Meter [ ]Yard [ ]

6. Batterij bijna leeg

Als het symbool knippert, betekent dit dat

de batterij bijna leeg is en moet worden vervangen.

(Zie 'Batterij vervangen')

7. Achtergrondverlichting

Gebruik de achtergrondverlichting om het LCD-

venter te kunnen zien als het donker is.

Door kort (korter dan 2 seconden) op de MODE-

knop te drukken als het instrument aan staat, wordt

de achtergrondverlichting AAN of UIT gezet. U kunt

de achtergrondverlichting ook uitzetten door de

laserafstandsmeter uit te schakelen. In dat geval

is de achtergrondverlichting uitgeschakeld als de

laserafstandsmeter weer wordt aangezet.

5. Afstandsweergave

De COOLSHOT maaktgebruik van het Prioriteit eerste

doel systeem.

Wanneer er tijdens één meting verschillende resultaten

worden verkregen, toont het LCD-venster de afstand

naar het doel dat het dichtst bij is.

Bijv.: het meten van de afstand tot een boom die voor

een huis staat.

"115 m" (afstand tot de boom) wordt weergegeven.

Dit is handig bij het golfen.

Boom Schutting Huis

Afstand tot doel 115 m 123 m 128 m

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nikon Coolshot in the language / languages: All languages as an attachment in your email.

The manual is 39,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nikon Coolshot Manual

Product: