31254
46
Zoom out
Zoom in
Previous page
1/56
Next page
- 46 -
Using the Scanner: Using the SF-200 Slide Feeder
Click the double right-arrow button in the attachment utility to
move the feed mechanism to where it is fully visible. If you
move the feed mechanism too far, click the left-arrow button to
move it back. The single-arrow buttons can be used for fine
adjustments. Once the feed mechanism is visible, insert the
pegs on the attachment into the holes in the feed mechanism.
Caution: Be sure that the attachment is securely in place.
If the attachment is loose, slides may not feed properly and dam-
age to the SF-200 could result.
Click the OK button in the attachment utility window to return
the feed mechanism to its initial position. You are now ready
to begin scanning.
When scanning slides with flat mounts or slides less than 2 mm
thick,
you will need to remove the attachment. Use the attach-
ment utility as d
escribed above to move the feed mechanism
into the magazine, then
remove the attachment and click OK to
return the feed mechanism to its initial position.
What to do if the feeder jams
If a jam occurs, open the magazine cover and remove the slides
remaining in the feed and eject magazines. Pull back the feed
push-plate and hook it in the notch so that it does not spring
back to its original position.
The method for resolving a jam depends on the position of the
feed mechanism when the jam occurred. If the jammed slide is
visible in the magazine and the feed mechanism has returned to
its housing in the front of the unit, the jammed slide can be
removed with your fingers. If the feed mechanism has locked
while feeding a slide, you will need to use the attachment utility
to resolve the jam (the attachment utility is a special program
for the SF-200 distributed with the Nikon Scan software that
came with your scanner).
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nikon COOLSCAN_LS2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nikon COOLSCAN_LS2000 in the language / languages: English as an attachment in your email.

The manual is 3,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nikon COOLSCAN_LS2000

Nikon COOLSCAN_LS2000 User Manual - German - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info