31254
42
Zoom out
Zoom in
Previous page
1/56
Next page
- 42 -
Using the Scanner: Using the SF-200 Slide Feeder
Connecting the SF-200 to the scanner
The scanner must be on its base before the SF-200 can be
inserted. If the scanner is currently installed on its side, turn the
scanner onto its base, with the power switch to the left when
viewed from the front. Slide the SF-200 into the scanner’s
adapter slot, stopping when the feeder contacts the back of the
slot. The SF-200 should be oriented as shown below when
inserted. Push the feeder until the connector on the rear of the
feeder is seated securely in the socket at the back of the slot.
The SF-200 is properly inserted if the status LED on the front of
the feeder lights when the scanner is turned on. If the scanner
is on when the SF-200 is inserted, the feeder’s status LED will
blink once to indicate that the feeder has been inserted cor-
rectly. In all other respects, the feeder LED functions in the
same way as the scanner status LED.
Caution: When the feeder is inserted with the power on, or
the scanner turned on after the feeder has been inserted with the
power off, the feed mechanism will return to the initial position.
While this operation is in progress, the status LED on the front of
the feeder will blink. Do not perform any operations while the LED
is blinking.
Status LED
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nikon COOLSCAN_LS2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nikon COOLSCAN_LS2000 in the language / languages: English as an attachment in your email.

The manual is 3,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nikon COOLSCAN_LS2000

Nikon COOLSCAN_LS2000 User Manual - German - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info