31254
27
Zoom out
Zoom in
Previous page
1/56
Next page
- 27 -
Using the Scanner: Turning the Scanner On
Using the Scanner
This chapter covers basic scanner operations, from turning the
scanner on to replacing adapters and inserting and removing
film. Actual scanning is outlined in the User’s Guide and de-
scribed in more detail in the software reference manuals.
Turning the Scanner On
Before turning on your computer, turn on the scanner and any
other peripheral devices. The scanner is on when the end of
the power switch labeled “1” is down.
When the scanner is turned on, the status LED will blink while
the scanner initializes. Initialization is complete when the LED
glows steadily. Once initialization has completed, turn on any
other peripheral devices and then start the computer.
Inserting and Removing Adapters
The LS-2000 uses a variety of adapters to scan different types
of film. Adapters are provided for scanning single 35 mm slide
mounts and 35 mm film in strips of from two to six frames.
Other adapters are available separately for scanning IX240 film
and for consecutive scanning of 35 mm slides.
All of these adapters can be mounted on the scanner while the
scanner is on and connected to a computer. To mount an
adapter, check that the status LED is glowing steadily. Adapters
can not be inserted or removed while the status LED is blinking.
Open the scanner’s front cover and slide the adapter in as
shown below, stopping when the adapter is firmly in place.
(The illustration above shows the slide adapter. The direction
of insertion for other adapters is shown below.)
Power switch on (“1” down)
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nikon COOLSCAN_LS2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nikon COOLSCAN_LS2000 in the language / languages: English as an attachment in your email.

The manual is 3,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nikon COOLSCAN_LS2000

Nikon COOLSCAN_LS2000 User Manual - German - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info