31252
33
Zoom out
Zoom in
Previous page
1/36
Next page
- 33 -
6. Troubleshooting
If something unusual should occur, please check the following
items before you assume that there is a unit failure. For more
details, refer to the Troubleshooting section of the software
manual.
Scanning cannot be performed.
Is the SCSI cable connected?
Connect the SCSI cable.
Are you using the supplied SCSI cable?
Use the supplied SCSI cable
Is the end of the connected SCSI cable terminated?
Connect the terminator.
Is the SCSI ID number different from the SCSI ID of other
devices?
Change the ID number if it is duplicated.
Are you using a recommended SCSI board ? (For Windows
version)
Use a recommended SCSI board.
Are the numbers you have set for I/O, INT and DMA for
the SCSI board different from those for other boards? (For
Windows version)
Does your system satisfy our recommended system
requirements?
Provide the recommended system.
Have you installed software?
For information on installing and operating software, refer to
the software manual provided with the unit.
Have you properly set the configuration, such as
CONFIG.SYS ?
If you have installed applications for Windows, for instance,
note that the configuration may change automatically. (For
Windows version)
Poor image quality.
Have you set the film properly?
Set the film properly.
Can you see dust on the film?
Remove dust on the film with a blower or photographic
brush.
Was the unit subjected to vibration during the scanning
operation?
Place the unit where it will not be subjected to vibration or
physical shocks.
Are you using utility software properly?
For details, please refer to the manual for your software.
The auto slide feeder display LED does not light.
Is the LS-1000 power on?
Turn on the power.
Are the LS-1000 and the auto slide feeder properly
connected?
Switch off the LS-1000 and re-connect.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nikon COOLSCAN_LS1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nikon COOLSCAN_LS1000 in the language / languages: English as an attachment in your email.

The manual is 1,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nikon COOLSCAN_LS1000

Nikon COOLSCAN_LS1000 User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info