570908
53
Zoom out
Zoom in
Previous page
1/112
Next page
45
Inserting film into the adapter film slot will activate the adapter’s feed mechanism. Be sure to load the
film while the mechanism is in operation, as otherwise an error may occur.
When film is inserted in the SA-21, the adapter’s lock mechanism will be
activated, locking the adapter in place and preventing its removal while film
is present in the adapter. Before removing the SA-21 from the scanner,
wait until the status LED on the front of the scanner glows steadily and
eject the film by clicking the eject button in the scan window (see right). If
your computer is off or Nikon Scan is not running, you can also eject the film by turning the scanner off
and then on again and waiting for the film to be ejected automatically (be sure the status LED on the
front of the scanner is glowing steadily before turning the scanner off). Once the film has been ejected,
the lock will be released and the adapter can be removed by sliding it out of the adapter slot. Remem-
ber to close the sliding cover when no adapter is present in the scanner.
Attempting to remove the adapter while it is locked may interfere with the connection between the
adapter and the scanner. If the scanner fails to recognize the adapter, push the adapter back into the
adapter slot to re-establish the connection.
Pg. For more information on:
75 Scanning short, long, or damaged film strips
71 What to do if film jams in the SA-21
12-3
Insert the film to be scanned into the adapter film slot. The type of film that can be scanned depends on
the adapter. This step describes the kinds of film that can be used with the SA-21 strip-film adapter and
MA-20 (S) slide-mount adapter.
SA-21
The SA-21 can be used to scan strips of 35 mm film from two to six
frames in length. Hold the film lightly by both edges with the emul-
sion surface face down (i.e., with the shiny side of the film face up),
grasping it gently so that the edges of the film do not curl, and slide
it into the adapter film slot as shown at right. Once the film has
been inserted a short distance, the adapter’s feed mechanism will
be activated and the film will be loaded automatically. The status
LED will blink while the scanner readies the film for scanning.
Note that not all film is suitable for use in the SA-21; refer to “Troubleshooting for the SA-21: Scanning
Short, Long, or Damaged Film Strips” for information on what film can not be scanned in the SA-21 and
how to modify it for scanning. Before inserting the film, make sure that it is free from dust, and avoid
getting dust on any portion of the film that protrudes from the adapter during scanning.
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nikon Coolscan IV ED at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nikon Coolscan IV ED in the language / languages: English as an attachment in your email.

The manual is 6,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nikon Coolscan IV ED

Nikon Coolscan IV ED User Manual - German - 112 pages

Nikon Coolscan IV ED User Manual - Dutch - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info