102858
92
Zoom out
Zoom in
Previous page
1/105
Next page
183182
3
Connect the interface cable to the computer
Connect the other end of the cable to the computer
as shown at right.
4
Connect the interface cable to the camera
Connect the UC-E1 USB cable to the camera’s
interface connector. While the interface cable is
connected, the monitor will be off and all controls
except the power switch and TRANSFER button
disabled.
Connect the Camera Directly to the Computer
The camera may not function as expected when connected via a USB hub or
keyboard.
Register the Camera with the System (Windows)
The first time the camera is connected to a Windows computer, the camera
must be “registered” with the system so that the computer will know how to
communicate with the camera. If you are using Windows Millennium Edition
(Me) or Windows 2000, the computer will register the camera automatically the
first time the camera is connected. The files needed to register the camera with
Windows 98/98 Second Edition (SE) is contained on the Nikon View installer
CD. Be sure the CD is inserted in the drive when you first connect your camera.
Other versions of Windows do not support USB. More information on
registering your camera can be found in Nikon View Reference Manual.
Use a Reliable Power Source
When transferring data between the camera and the computer, we recommend
that you use an EH-21 AC adapter/battery charger (available separately) to
ensure a reliable power supply. If the camera is running on battery power, be
sure that the battery is charged. If possible, have spare batteries on hand. If the
battery runs low, turn the camera off and replace the battery after verifying that
the image transfer dialog is not displayed in the computer monitor.
5
Press the TRANSFER button
Once the camera is turned on, Nikon View will
automatically detect the camera. After Nikon View
has started, press the TRANSFER button on the
camera to copy all marked images from the CF
memory card to the computer. The message
“PREPARING TO TRANSFER” will appear in the
camera monitor. After a brief pause, transfer will
begin, and the message “TRANSFERRING IMAGE
TO COMPUTER” will be displayed.
6
Disconnect the camera
When all marked images have been transferred,
the monitor will show “TRANSFER COMPLETED.”
Before disconnecting the cable or turning the
camera off, you must remove the camera from the
system as described below.
PREPARING
TO TRANSFER
TRANSFERRING
IMAGE TO
COMPUTER
TRANSFER COMPLETED
Interrupting Transfer
To end transfer before all marked pictures have been copied to the computer,
click the “Cancel” button in the Nikon View transfer progress dialog. The
message “TRANSFER CANCELLED” will appear in the camera monitor. Even
though the message, “TRANSFER COMPLETED” may appear after transfer has
been cancelled, transfer has not been successfully completed.
Reference—Connections
Transfer Time
Note that when large numbers of images are selected, some time will be
required for transfer.
See p. 121 for more information on selecting images for transfer as they are
taken.
See p. 174 for more information on selecting images for transfer after they are
taken.
COOLPIX885 (E) 01.10.22 6:03 PM Page 182
92


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nikon Coolpix 885 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nikon Coolpix 885 in the language / languages: English as an attachment in your email.

The manual is 3,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nikon Coolpix 885

Nikon Coolpix 885 User Manual - German - 105 pages

Nikon Coolpix 885 User Manual - Dutch - 206 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info