604480
7
Zoom out
Zoom in
Previous page
1/39
Next page
En
Fr
Es
Pt
12 13
En
Fr
Es
Pt
Internal display
1. - Target aiming/Laser irradiate system
- Aim at the target. Position the target at the center of the reticle.
『
- Appears while the laser is being used for a measurement.
(Remainspresentduringsinglemeasurement.Blinksduringcontinuousmeasurements.)
Warning:Donotlookintotheobjectivelenseswhenthismarkisshown.
2Upper display
Lower display
<Examples of measurement results>
Upper 4 digits: Linear distance
Displayofresults:( 999.9 meters/yards) e.g. 234.9 meters =
Displayofresults:( 1,000 meters/yards) e.g. 1,065 yards =
Lower 3 digits: Slope adjusted distance
The results of "Horizontal distance ± Height"
Displayofresults:( 999 meters/yards) e.g. 235 meters =
Displayofresults:( 1,000 meters/yards)
Now measuring
Failure to measure or unable to measure distance
3.
Display units
Indicates distance being measured in meters.
Indicates distance being measured in yards.
4. Indicatesbatterycondition.(See"Changing Batteries")
5. Measurementresultsandsymbolsign
- Calculates linear distance to your target, and displays the result in the upper 4-digit 7-segment
display.
-Calculates the slope adjusted distance to your target by measuring linear distance and angle,
and displays the result in the lower 3-digit 7-segment display.
6.
Active Brightness Control Viewfinder
Active Brightness Control Viewfinder detects light conditions of
the ground area mainly in the view field
and, when necessary,
automatically turns on the orange LED illumination.
The brightness of the orange illumination is adjusted
automatically according to the light conditions.
Although the LCD was produced using the most advanced
technology, it is impossible to eliminatedustcompletely.When
using this product, the LCD is magnified by high magnification
of the eyepiece lens and dust may appear as a defect. It will not,
however, affect measurement accuracy.
Upward Downward
Distance/measurement status display
Digitally indicates measured distance in meters/yards. Also indicates
measuringstatussuchas“Measurementinprogress,“Measurement
unsuccessful” or “Unable to measure.
Operational summary
Caution — use of controls or adjustments or
performance of procedures other than those
specified herein may result in hazardous radiation
exposure
1. Install a battery in the battery chamber. (See "Changing
Batteries")
2. Rubber eyepiece cup
Both eyeglass wearers and non-wearers can use this
rangefinder without attaching the rubber eyepiece cup.
3. Diopter adjustment
Adjust diopter to obtain a clear image in the LCD.
First, rotate the diopter adjustment ring counterclockwise until
it comes to a complete stop. Next, turn on the power to activate
the LCD when you look through the Nikon Callaway iQ. Rotate
the diopter adjustment ring clockwise until the display comes
into focus.
If the diopter is not adjusted to correspond to your eyesight,
you may not be able to aim your subject.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nikon Callaway iQ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nikon Callaway iQ in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 12,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info