733843
7
Zoom out
Zoom in
Previous page
1/43
Next page
En
Fr
Es
Pt
12 13
En
Fr
Es
Pt
Internal display
1. - Target aiming/Laser irradiate system
- Aim at the target. Position the target at the center of the reticle.
『
- Appears while the laser is being used for a measurement.
(Remains present during single measurement. Blinks during continuous measurements.)
Warning:Donotlookintotheobjectivelenseswhenthismarkisshown.
2
- Distance/measurement status display
Digitally indicates measured distance in meters or yards. Also indicates measuring
status such as “Measurement in progress”, “Measurement unsuccessful” or “Unable to
measure.”
<Examples of measurement results>
(Distance)
Display of results: ( 999.9m/yards) e.g. 234.9 meters =
Display of results: ( 1,000m/yards) e.g. 1,065 yards =
Now measuring
Failure to measure or unable to measure distance
3.
Display units
Indicates distance being measured in meters.
Indicates distance being measured in yards.
4.
Indicates battery condition. (See "Changing Batteries")
5.
Display modes
A. Horizontal Distance Mode
 『 』Calculates horizontal distance to your target by measuring the linear distance and angle, and displays the
results.
B. Linear Distance Mode
 『 (no sign) 』 Calculates linear distance to your target and displays the results.
6.
Target Priority mode
First Target Priority mode
 『
Indicated when First Target Priority mode is set.
Distant Target Priority mode
 『
Indicated when Distant Target Priority mode is set.
Although the LCD was produced using the most advanced
technology, it is impossible to eliminate dust completely.
Whenusingthisproduct,theLCDismagnifiedbyhigh
magnification of the eyepiece lens and dust may appear as a
defect. It will not, however, affect measurement accuracy.
Operational summary
Caution — use of controls or adjustments or
performance of procedures other than those
specified herein may result in hazardous radiation
exposure
1. Install a battery in the battery chamber. (See "Changing
Batteries")
2. Rubber eyepiece cup
Both eyeglass wearers and non-wearers can use this
rangefinder without attaching the rubber eyepiece cup.
3. Diopter adjustment
Adjust diopter to obtain a clear image in the LCD.
First, rotate the diopter adjustment ring counterclockwise
until it comes to a complete stop. Next, turn on the power
to activate the LCD when you look through the Nikon
RifleHunter 1000/Archer's Choice MAX. Rotate the diopter
adjustment ring clockwise until the display comes into focus.
If the diopter is not adjusted to correspond to your
eyesight, you may not be able to aim your subject.
7. Active Brightness Control Viewfinder
Active Brightness Control Viewfinder detects light conditions
of the ground area mainly in the view field
and, when
necessary, automatically turns on the orange LED illumination.
The brightness of the orange illumination is adjusted
automatically according to the light conditions.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nikon Archers Choice MAX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nikon Archers Choice MAX in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 13,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info